- Hewlett-Packard Owner's Guide Monitor C160, C180, C200, C240, C360

141
Changing Your Workstation’s Hardware Configuration
Installing an EISA, PCI, or GSC Option Board
Installing the Option Board
Follow these steps to install a GSC, EISA, or PCI board into your worksta-
tion:
1 Remove the main tray assembly as described in “Removing the Main Tray As-
sembly” earlier in this appendix.
2 Press the fan release clip and rotate the fan, as shown in Figure 50.
Figure 50 Rotating the Fan
3 Remove the screw from the EISA retainer, and remove the EISA retainer, as
shown in Figure 51.
Figure 51 Removing the EISA Retainer
EISA Retainer