Specifications

Removal and Replacement Procedures
Maintenance and Service Guide 5–19
5.9 LED Cover
1. Prepare the computer for disassembly (Section 5.3).
2. Turn the computer bottom side up with the rear panel facing
forward.
3. Remove the two TM2.5 × 8.0 screws that secure the LED
cover to the base enclosure (Figure 5-16).
Figure 5-16. Removing the LED Cover Screws
4. Turn the computer top side up with the front facing forward.
5. Open the computer.
LED Cover
Spare Part Number Information
For use only with Evo N1015 models and Presario 900 models
using 45W processors*
For use only with Evo N1005 models and Presario 900 models
using non-45W processors*
310695-001
285536-001
*refer to Section 5.12, “Processor,” for a listing of 45W and non-45W
processors and spare part numbers
272638-002.book Page 19 Wednesday, November 27, 2002 4:52 PM