Specifications

Removal and Replacement Procedures
Maintenance and Service Guide 5–25
4. Remove the following screws:
❏ One TM2.5 × 5.0 screw 1 next to the fan (Figure 5-20)
❏ Four spring-loaded TM2.5 × 14.0 shoulder screws 2
✎
The four spring-loaded shoulder screws should be removed and
installed in the “1,” “2,” “3,” “4” sequence stamped on the heat
spreader adjacent to each screwhole.
❏ One TM2.5 × 8.0 screw 3 next to the keyboard and
TouchPad ZIF connectors
Figure 5-20. Removing the Heat Spreader Screws
272638-002.book Page 25 Wednesday, November 27, 2002 4:52 PM