Specifications

Removal and Replacement Procedures
Maintenance and Service Guide 5–55
g. Speaker assembly (Section 5.19)
h. Top cover and TouchPad cable (Section 5.20)
i. Fan (Section 5.21)
2. Remove the two TM2.5 × 5.0 screws 1 that secure the optical
drive rear alignment rail to the base enclosure (Figure 5-42).
3. Remove the two TM2.5 × 5.0 screws 2 that secure the optical
drive rear alignment rail to the base enclosure.
4. Remove the rear alignment rail 3 from the base enclosure.
5. Remove the rear alignment rail 4 from the base enclosure.
Figure 5-42. Removing the Optical Drive Alignment Rails
✎
The optical drive alignment rails are included in the
Miscellaneous Plastics/Hardware Kit, spare part number
285541-001.
272638-002.book Page 55 Wednesday, November 27, 2002 4:52 PM