Specifications

Product Description
Maintenance and Service Guide 1–19
2. Remove the RTC battery (refer to Section 5.7, “Disk Cell
RTC Battery”).
3. Wait approximately five minutes.
4. Replace the RTC battery and reassemble the computer.
5. Connect AC power to the computer. Do not reinsert any
battery packs at this time.
6. Turn on the computer.
All passwords and all CMOS settings have been cleared.
1.4 Power Management
The notebook comes with power management features that
extend battery operating time and conserve power. The notebook
supports the following power management features:
■ Standby
■ Hibernation
■ Setting customization by the user
■ Hotkeys for setting level of performance
■ Smart battery that provides an accurate battery power gauge
■ Battery calibration
■ Lid switch suspend/resume
■ Power/Suspend button
■ Advanced Configuration and Power Management (ACP)
compliance
272638-002.book Page 19 Wednesday, November 27, 2002 4:52 PM