Technical data

Configuring SNMP
13.4 Configuring SNMP
Table 13–3 SNMP Logging Options
SNMP_GEN_LOGFILE
Logical name: TCPIP$SNMP_GEN_LOGFILE
Format: config SNMP_GEN_LOGFILE 1
Description: Redirects messages to SYS$OUTPUT and records them in the
following files:
• TCPIP$ESNMP_SERVERprocess-id.LOG, where process-id is
the eight-digit hexadecimal process identifier of the master
agent.
• TCPIP$ESNMP_RESIDENT_SUBAGENTprocess-id.LOG,
where process-id is the eight-digit hexadecimal process
identifier of the resident subagent.
• TCPIP$OS_MIBSprocess-id.LOG, where process-id is the eight-
digit hexadecimal process identifier of the MIB II subagent.
• TCPIP$HR_MIBprocess-id.LOG, where process-id is the eight-
digit hexadecimal process identifier of the Host Resources MIB
subagent.
Type: Dynamic
SNMP_SUPPRESS_LOGGING_TIMESTAMP
Logical name: SNMP_SUPPRESS_LOGGING_TIMESTAMP
Format: config TCPIP$SNMP_SUPPRESS_LOGGING_TIMESTAMP 1
Description: Specifies whether a timestamp is included in the log message.
If not defined, a timestamp is included. The value can be 1 (to
prevent timestamp information from being included) or 0 (to allow
timestamp information to be included; the default).
Type: Dynamic
SNMP_VERBOSE_LOGGING
Logical name: TCPIP$SNMP_VERBOSE_LOGGING
Format: config SNMP_VERBOSE_LOGGING 1
Description: Specifies whether to log detailed information or not. The value can
be 1 (to log detailed information) or 0 (to log the default amount of
information).
Type: Dynamic
Configuring SNMP 13–11