Manualshelf

Technical data

ManualsBrandsCompaq ManualsComputer equipmentCompaq TCP/IP Services for OpenVMS
271272273274275276277278279280
Configuring SNMP
13.4 Configuring SNMP
Table 13–4 (Cont.) SNMP Operation Options
SYSLOCATION
Logical name: Not available
Format:
SYSLOCATION host-location
Description: Specifies the host or contact location information.
Do not modify this option. Use TCPIP$CONFIG or the SET
CONFIGURATION SNMP command to change the information
associated with this option.
Type: Not dynamic
trap
Logical name: Not available
Format:
trap trap-name version IP-address
Description: Specifies:
The name of the trap (trap-name).
Whether to trap for SNMP Version 1 requests only (version).
Specify V1 for Version 1 traps only. Specify V2C for both
Version 1 and Version 2 traps.
The internet address of the client (address). Do not specify
0.0.0.0 for the client address.
For information about setting individual trap types depending on
the destination host, see Section 13.6.5.3.
Type: Not dynamic
Table 13–5 Timing and Timeout Handling Options
AGENTX_SESSION_TIMEOUT
Logical name: TCPIP$AGENTX_SESSION_TIMEOUT
Format:
config AGENTX_SESSION_TIMEOUT seconds
(continued on next page)
13–14 Configuring SNMP