Technical data

SET CONFIGURATION INTERFACE

TCPIP> SET CONFIGURATION INTERFACE PP0 /SERIAL_DEVICE=TTA0: -

_TCPIP> /HOST=10.10.1.2 /DESTINATION=10.10.1.3

Conﬁgures the interface as a PPP serial device. This command speciﬁes

that the local host is a dialup provider. The address speciﬁed with the

/DESTINATION qualiﬁer (10.10.1.3) is the address assigned to the client

system requesting an address.

Refer to the HP TCP/IP Services for OpenVMS Management manual for more

information about setting up interfaces for SLIP and PPP communication.

Command Descriptions 2–101