Technical data

SET CONFIGURATION START ROUTING

Enters information into the conﬁguration database to start dynamic routing when

TCP/IP Services starts.

Related commands: SHOW CONFIGURATION START ROUTING,

START ROUTING

Format

SET CONFIGURATION START [NO]ROUTING [ /GATED ]

[ /LOG ]

[ /SUPPLY[=DEFAULT] ]

Qualiﬁers

/GATED

Optional.

Enables the gateway routing daemon (GATED).

If you enable dynamic GATED routing, you will be able to conﬁgure this host

to use any combination of the following routing protocols to exchange dynamic

routing information with other hosts on the network:

• RIP (Routing Information Protocol), Versions 1 and 2

• RDISC (Router Discovery Protocol)

• OSPF (Open Shortest Path First)

• EGP (Exterior Gateway Protocol)

• BGP (Border Gateway Protocol), BGP-4

• Static routes

/LOG

Optional. Default: No logging.

Applies to ROUTED. Do not use with /GATED.

Logs routing activity to

SYS$SYSDEVICE:[TCPIP$ROUTED]TCPIP$ROUTED.LOG.

/SUPPLY[=DEFAULT]

Optional. Applies only to ROUTED. Do not use with /GATED.

Broadcasts routing information to other hosts in 30-second intervals.

If you specify /SUPPLY=DEFAULT, the local host supplies the default network

route.

Examples

TCPIP> SET CONFIGURATION START ROUTING /SUPPLY

Starts ROUTED dynamic routing when TCP/IP Services is started. The local

host both broadcasts and receives network routing information.

Command Descriptions 2–119