Manualshelf

Technical data

ManualsBrandsCompaq ManualsComputer equipmentCompaq TCP/IP Services for OpenVMS
141142143144145146147148149150
SET INTERFACE
3.
TCPIP> SET INTERFACE PP0 /SERIAL_DEVICE=TTA0: -
_TCPIP> /HOST=10.10.1.2 /DESTINATION=10.10.1.3
Configures the interface as a PPP serial device. This command specifies
that the local host is a dialup provider. The address specified with the
/DESTINATION qualifier (10.10.1.3) is the address assigned to the client
system requesting an address.
Refer to HP TCP/IP Services for OpenVMS Management manual for more
information on setting up interfaces for SLIP and PPP communication.
4.
TCPIP> SET NOINTERFACE DE2
TCPIP> SET INTERFACE DE2 /LOOPBACK
.
.
.
TCPIP> SET INTERFACE DE2
Deletes interface DE2, sets loopback mode for testing this interface, and, after
testing, reactivates it.
Command Descriptions 2–127