Technical data

SHOW BOOTP
SHOW BOOTP
Displays client entries in the BOOTP database.
Related command: SET BOOTP
Format
SHOW BOOTP [ host ]
[ /HARDWARE=ADDRESS=hex_address ]
[ /LOCAL ]
[ /OUTPUT=file ]
Parameters
host
Optional. Default: Displays all entries.
Host entry you want to display.
Qualifiers
/HARDWARE=ADDRESS=hex_address
Optional. Default: None.
Identifies the entry by hardware address.
Specify the address as hh-hh-hh-hh-hh-hh.
/LOCAL
Optional. Default: The command checks the hosts database; if a lookup fails, it
also checks the BIND resolver.
To display hardware-address/IP-identification matches, limits host-name-to-
IP-address lookup for each entry in the BOOTP database to the local hosts
database.
/OUTPUT=file
Optional. Default: Screen display.
Output is directed to the specified file.
Examples
1.
TCPIP> SHOW BOOTP MYNA /FULL
Host: 17.22.222.255 myna
Hardware Address: 07-06-2B-05-04-03
Network mask: 255.0.0.0 Type: Ethernet
File: MYNA.SYS
Time offset: 0 Vendor: Birds, Inc.
Gateways: not defined
Command Descriptions 2–151