Technical data

SHOW CONFIGURATION
Qualifiers
/COMMON
Optional. Default: Node specific.
Valid only with SHOW CONFIGURATION ENABLE SERVICE.
Displays the information in the configuration database for the clusterwide
enabling or disabling of services.
/FULL
Optional. The default is to give a brief listing of the information.
Displays complete information.
Use with the component parameter.
/OUTPUT=file
Optional. Default: Screen display.
Writes output to the specified file.
Examples
1.
TCPIP> SHOW CONFIGURATION ENABLE SERVICE
Enable service
FTP, FTP_CLIENT, LPD, MOUNT, NFS, NFS_CLIENT, PCNFS,
PORTMAPPER, REXEC, RSH, SMTP, SNMP
Displays the services configured in the services database that will be enabled
by the TCP/IP Services startup procedure.
2.
TCPIP> SHOW CONFIGURATION SNMP
SNMP Configuration
Flags: AuthenTraps Sets
Contact: Sam Spade
Location
First: Falcon Building
Second: Los Angeles, California
Community Type Address_list
public Read 0.0.0.0
trapit Read Trap 136.20.0.10
trapit2 Read Trap 136.20.0.12, 136.20.0.15
rw2 Read Write 136.20.0.15, 136.20.0.100
Displays the SNMP configuration.
2–156 Command Descriptions