Technical data

SHOW DEVICE_SOCKET
SHOW DEVICE_SOCKET
Displays:
• Device socket counters
• Current settings from the running communications software
(A device socket is composed of two parts: the Internet device (interface) and the
socket.)
Format
SHOW DEVICE_SOCKET [ device_socket ]
[ /CONTINUOUS[=n]]
[ /FULL ]
[ /HOST=host ]
[ /[NO]LOCAL ]
[ /PORT=n ]
[ /SERVICE=service ]
[ /TYPE=socket_type ]
Parameters
device_socket
Optional. Default: All device sockets.
Device socket for which you want information.
Specify the characters BG and the device’s unit number, for example, BG3, BG17.
Qualifiers
/CONTINUOUS[=n]
Optional. Default: Static display; /CONTINUOUS=4.
Automatically updates the display.
Screen update interval in seconds. Valid only for a specific device socket.
To terminate the display, press Ctrl/C.
/FULL
Optional. The default is to give a brief listing of the information.
Displays complete information, including:
• Application option settings, for example, ACCEPT or FULL_DUPLEX_CLOSE
• State of the service
• Counters for receiving and sending buffers
/HOST=host
Optional. Default: All hosts.
Displays information for device sockets bound to the specified host.
This does not include device sockets bound to the "ANY host" (address 0.0.0.0).
Command Descriptions 2–159