Technical data

SHOW PROTOCOL
SHOW PROTOCOL
Displays statistics and configuration information for the specified protocol.
Related commands: SET PROTOCOL SET CONFIGURATION PROTOCOL
Format
SHOW PROTOCOL [ protocol ]
[ /PARAMETERS ]
Parameters
protocol
Optional. Default: All protocols.
Specify one of the following: ICMP, IP, TCP, UDP.
Qualifiers
/PARAMETERS
Optional.
Shows parameter settings. You can specify any protocol.
Examples
1.
TCPIP> SHOW PROTOCOL TCP
tcp:
64213 packets sent
56262 data packets (44164814 bytes)
49 data packets (39372 bytes) retransmitted
7792 ack-only packets (7923 delayed)
0 URG only packets
0 window probe packets
10 window update packets
100 control packets
50000 packets received
37102 acks (for 44165036 bytes)
381 duplicate acks
0 acks for unsent data
23176 packets (194520 bytes) received in-sequence
233 completely duplicate packets (290 bytes)
50 packets with some dup. data (65 bytes duped)
57 out-of-order packets (43 bytes)
4 packets (4294967292 bytes) of data after window
0 window probes
916 window update packets
0 packets received after close
0 discarded for bad checksums
0 discarded for bad header offset fields
0 discarded because packet too short
54 connection requests
35 connection accepts
89 connections established (including accepts)
91 connections closed (including 3 drops)
1 embryonic connection dropped
30253 segments updated rtt (of 30286 attempts)
14 retransmit timeouts
0 connections dropped by rexmit timeout
1 persist timeout
Command Descriptions 2–181