Technical data

SHOW SERVICE
SHOW SERVICE
Displays the following information about configured services:
Service name
Port for listening
Protocol
Process name
IP address
State
RPC information
Related commands: SET SERVICE, DISABLE SERVICE, ENABLE SERVICE
Format
SHOW SERVICE [ service ]
[ /ADDRESS=address ]
[ /FULL ]
[ /PERMANENT ]
[ /PORT=n ]
[ /PROCESS=process ]
[ /PROTOCOL=protocol ]
[ /RPC ]
Parameters
service
Optional. Default: All services.
Service for which you want information.
Qualifiers
/ADDRESS=address
Optional. Default: All services.
Displays information for only the services that use the specified address.
/FULL
Optional. Default: Brief description is displayed.
Provides a full display.
/PERMANENT
Optional.
Defaults:
• If TCP/IP Services is running and you omit the /PERMANENT qualifier, the
volatile database is displayed.
• If TCP/IP Services is not running, the permanent database is displayed.
You must include the /PERMANENT qualifier when you specify the /RPC
qualifier.
/PORT=n
Optional. Default: All services.
2–188 Command Descriptions