Technical data

SHOW SERVICE
Displays information only for services that use the specified port.
/PROCESS=process
Optional. Default: All services.
Displays information for only the services that use the specified process.
/PROTOCOL=protocol
Optional. Default: All services.
Displays information only for services that use the specified protocol.
/RPC
Optional. Default: No RPC information is displayed.
Displays a brief summary of the services that are configured with RPC
information. You must include the /PERMANENT qualifier when you specify
the /RPC qualifier.
Examples
1.
TCPIP> SHOW SERVICE /RPC /PERMANENT
RPC Protocol Versions
Service Program Number Lowest / Highest
MOUNT 100005 1 1
NFS 100003 2 2
PCNFS 150001 1 2
PORTMAPPER 100000 2 2
TCPIP>
Displays all previously set RPC information.
2.
TCPIP> SHOW SERVICE NFS /FULL /PERMANENT
Service: NFS
Port: 2049 Protocol: UDP Address: 0.0.0.0
Inactivity: 0 User_name: TCPIP$NFS Process: TCPIP$NFS
Limit: 1
File: TCPIP$SYSTEM:TCPIP$NFS_RUN.COM
Flags: TCPIP
Socket Opts: Rcheck Scheck
Receive: 64000 Send: 64000
Log Opts: Acpt Actv Dactv Conn Error Exit Logi Mdfy Rjct TimO Addr
File: SYS$SYSDEVICE:[TCPIP$NFS]TCPIP$NFS_RUN.LOG
RPC Opts
Program number: 100003 Lowest version: 2 Highest version: 2
Security
Reject msg: not defined
Accept host: 0.0.0.0
Accept netw: 0.0.0.0
TCPIP>
The /FULL and /PERMANENT qualifiers display RPC information for the
NFS server, whose program number is 100003, lowest version is 2, and
highest version is 2. This information is required for the NFS server to run.
Command Descriptions 2–189