Technical data

Table 3–2: Hardware Components Used for Configuration Shown in Figure
3–3
Callout Number
Description
1
BN21W-0B Y cable
2
H879-AA terminator
3
BN21K, BN21L, or 328215-00X cable
a
4
H885-AA trilink connector
a
The maximum combined length of the BN21K, BN21L, or 328215-00X cables must not exceed 25 meters (82
feet).
3.4 Displaying Adapters with the show Console Commands
The Cluster Hardware Configuration manual does not have any examples
that include the AlphaServer ES45. This section provides examples of using
the show config and show device console commands to display ES45
system configuration information.
Example 3–1 and Example 3–2 show a cluster configuration that uses a
shared SCSI bus for storage. Example 3–3 and Example 3–4 show a cluster
configuration that uses Fibre Channel for shared storage.
Example 3–1 shows the output from the show config console command
on an AlphaServer ES45 system in a cluster using a SCSI bus for shared
storage.
Example 3–1: Displaying Configuration on an AlphaServer ES45 in a
Cluster Using a SCSI Bus for Shared Storage
P00>>> show config
Compaq Computer Corporation
Compaq AlphaServer ES45 Model 2
Firmware
SRM Console: T6.1-5
PALcode: OpenVMS PALcode V1.93-36,
Tru64 UNIX PALcode V1.88-28
Serial ROM: V2.18-F
RMC ROM: V1.0
RMC Flash ROM: T1.6
Processors
CPU 0 Alpha EV68CB pass 2 or 2.1 1000 MHz 8MB Bcache
CPU 1 Alpha EV68CB pass 2 or 2.1 1000 MHz 8MB Bcache
CPU 2 Alpha EV68CB pass 2 or 2.1 1000 MHz 8MB Bcache
CPU 3 Alpha EV68CB pass 2 or 2.1 1000 MHz 8MB Bcache
Core Logic
Installing an AlphaServer ES45 into a TruCluster Server Configuration 3–7