Technical data

Example 3–4 shows the output from the show device console command
entered on an AlphaServer ES45 system in a cluster using Fibre Channel for
shared storage.
Example 3–4: Displaying Devices on an AlphaServer ES45 in a Cluster
Using Fibre Channel for Shared Storage
P00>>> show device
P00>>>show device
dgb42.1001.0.2.3 $1$DGA42 HSG80 V86F
dgb42.1002.0.2.3 $1$DGA42 HSG80 V86F
dgb42.1003.0.2.3 $1$DGA42 HSG80 V86F
dgb42.1004.0.2.3 $1$DGA42 HSG80 V86F
dka0.0.0.8.0 DKA0 COMPAQ BD018635CC BDC4
dka100.1.0.8.0 DKA100 COMPAQ BD018635CC BDC4
dkb0.0.0.1.2 DKB0 COMPAQ BD036635C5 B017
dkb100.1.0.1.2 DKB100 COMPAQ BD036635C5 B017
dkb200.2.0.1.2 DKB200 COMPAQ BD0186349B 3B12
dkb300.3.0.1.2 DKB300 COMPAQ BD0096349A 3B12
dkb400.4.0.1.2 DKB400 COMPAQ BD0096349A 3B12
dkb500.5.0.1.2 DKB500 COMPAQ BD0186349B 3B12
dkc0.0.0.101.2 DKC0 COMPAQ BD0186349B 3B12
dkc100.1.0.101.2 DKC100 COMPAQ BF00963643 3B05
dkc200.2.0.101.2 DKC200 COMPAQ BD0096349A 3B12
dkc300.3.0.101.2 DKC300 COMPAQ BD0186349B 3B12
dkc400.4.0.101.2 DKC400 COMPAQ BD0096349A 3B12
dkc500.5.0.101.2 DKC500 COMPAQ BD0186349B 3B12
dqa0.0.0.16.0 DQA0 Compaq CRD-8402B 1.03
dva0.0.0.1000.0 DVA0
fwa0.0.0.2.1 FWA0 00-60-6D-93-A0-1A
pga0.0.0.1.3 PGA0 WWN 2000-0000-c924-5d44
pgb0.0.0.2.3 PGB0 WWN 2000-0000-c924-5012
pka0.7.0.8.0 PKA0 SCSI Bus ID 7
pkb0.7.0.1.2 PKB0 SCSI Bus ID 7
pkc0.7.0.101.2 PKC0 SCSI Bus ID 7
P00>>>
3.5 Adding an ES45 with Dual Memory Channel Adapters to
a Cluster with Memory Channel Adapters Jumpered
for 512 MB
If your ES45 has dual Memory Channel adapters, they must be jumpered
for 128 MB because they are on the same PCI bus. Therefore, you cannot
add the ES45 to an existing cluster if the Memory Channel adapters of the
existing cluster member systems are jumpered for 512 MB.
Installing an AlphaServer ES45 into a TruCluster Server Configuration 3–13