Specifications

5–20 Maintenance and Service Guide
Removal and Replacement Procedures
3. Lift the front edge of the heat sink and swing it up and back
until the shield rests at a 45-degree angle
1
(Figure 5-13).
4. Pull the heat sink away from the base enclosure at a
45-degree angle
2
and remove it from the base enclosure.
Figure 5–13: Removing the Heat Sink
A thermal pad
3
is installed on the heat sink and makes contact
with the processor. Any time the heat sink is removed, inspect the
thermal pad for damage.
238850-003.book Page 20 Friday, December 21, 2001 2:53 PM