Owner's manual

Care and Maintenance

Compaq iPAQ Microportable Projector MP3800 User’s Guide 7–5

After the lamp module has been replaced, reset the lamp hours in

the on-screen display menu to prevent the “Lamp May Fail Soon.

Replacement Suggested” message from appearing again. To reset

the lamp hours:

1. Be sure the projector is turned off.

2. Make sure all connections except the power cable are

disconnected.

3. Press and hold the

button on top of the projector while

turning the projector on.

4. Connect the VGA cable to the projector. “Service” will now

be displayed as an option in the Main menu.

5. Select Service and press the

button on the top of the

projector.

6. Select Reset Lamp Hours from the Service menu and press

the

button.

7. Select Yes from the Confirm Reset menu and press the

button.

8. Select Save and Return.

281124-001.book!!Page!5!!Tuesday,!April!30,!2002!!10:00!AM