User`s guide

2-8 Pass-Through Mechanism Expansion Kit Installation Instructions
Compaq Confidential – Need to Know Required
Writer: Don Kaplan Project: Pass-Through Mechanism Expansion Kit Installation Instructions Comments:
Part Number: ER-TL881-EA. A01/138255-001 File Name: C-CH2 UP.DOC Last Saved On: 5/13/99 10:01 AM
6. Move the left end of the belt to the right and thread it around the idler
pulley (Figure 2-5) and back to meet what started out as the right end of
the belt. When you hold the two ends of the belt, they should be
touching or very slightly overlapping (Figure 2-7).
Table 2-1
Required Belt Length
Number of Extensions (Base, Motor
Drive, Extension)
Length of Belt
2 27 inches
3 41 inches
4 55 inches
5 69 inches
6 83 inches
SHR-1237
Figure 2-6. Threading the Belt Around the Motor Drive Pulley