User guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-6
Using the VT100 Interface
Writer:
Chris Seiter
Project:
Compaq Netelligent 2724/2824 Dual-Speed Hub User Guide
Comments:
299440-001
File Name:
2824_B.DOC
Last Saved On:
6/23/97 5:26 PM
Displaying a Data Screen
To select a data screen from the menu, enter the letter that corresponds to the
option, or use the arrow keys to highlight the option. Then press <Enter>.
The following table shows the available VT100 screens in the Boot and
Runtime operational modes for direct serial port and Telnet connections.
Runtime is the normal mode of operation. The Boot screens appear only when
the hub executes the Boot sequence or if Runtime is unable to start.
Screen Boot Runtime
L
og
in
Sc
r
ee
n
99
Boot Main Selection Menu
9
Runtime Main Selection Menu
9
S
y
stem Information
99
Mana
g
ement A
g
ent Confi
g
uration
99
Port Statistics
9
Stack Confi
g
uration
9
Backu
p
Port Confi
g
uration
9
Chan
g
e VT100 Password
99
Download Firmware
99
Serial Port Setu
p
99
User Access Confi
g
uration
9
IP User Access
9
IPX User Access
9
Lo
g
out
99
Table B-1.
Available VT100 Screens in Boot and Runtime
Navigating the VT100 Screens
The VT100 data screens consist of editable and non-editable data fields. Most
data screens also display the system up time, system name (first 25 characters),
and hub IP address. (The IP address appears only if the hub is connected via a
Telnet session.)