User guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-21
Compaq Netelligent 2724/2824 Dual-Speed Hub User Guide
Writer:
Chris Seiter
Project:
Compaq Netelligent 2724/2824 Dual-Speed Hub User Guide
Comments:
299440-001
File Name:
2824_B.DOC
Last Saved On:
6/23/97 5:26 PM
Setting Up the Serial Port
The Serial Port Setup screen lets you set up the hub’s serial port configuration
parameters.
The Current Baud Rate field shows the baud rate that the serial port is currently
operating on.
Figure B- 10.
Serial Port Setup Screen
The Serial Port Setup screen lets you modify the following information:
Port Number — This field applies only to multi-serial port systems.
Auto Baud Selection — Select “Enabled” and “Disabled” to enable or disable
the function of automatically cycling through the supported baud rates to look
for modem connection. The default setting is “Disabled.”
Baud Rate — Select from the available baud rates of “2400,” “9600,” or
“19200” if auto baud selection is disabled. If auto baud is enabled, this field
displays “Auto.”