QuickSpecs
HP ProLiant DL580
HP ProLiant DL580HP ProLiant DL580
HP ProLiant DL580
Unique Options
Unique OptionsUnique Options
Unique Options
8 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 2048 MB)
202173-B21
4 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 1024 MB)
202172-B21
2 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 512 MB)
202171-B21
1 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 256 MB)
202170-B21
Hot Plug Memory Expansion Board
NOTE:
NOTE: NOTE:
NOTE:
The Hot Plug Memory Expansion Board provides 8 additional DIMM slots for
powering memory-intensive applications.
203320-B21
800W Hot Plug Redundant Power Supply US
278535-001
800W Hot Plug Redundant Power Supply -inc IEC
278535-B21
DL580 G2 24" - 19" Rack Adapter Kit
332815-B21
DL580 G2 Folding Cable Management Arm
289294-B21
DL580 G2 Cable Assembly, SCSI, Ultra3, LVDS
NOTE:
NOTE: NOTE:
NOTE:
All HP ProLiant DL580 G2 models ship standard with the integrated Smart
Array 5i Plus Controller, which has been designed to deliver maximum performance
and availability across the internal SCSI Duplex backplane.
288874-B21
The Ultra3 SCSI cable is required only if the customer chooses to bypass the
Smart Array 5i Plus Controller and connect slot-based SCSI adapters or RAID
controllers to the internal SCSI Duplex backplane.
Two cables are required to maintain the standard, duplexed configuration of
the backplane.
One cable is required if the simplex configuration is chosen
The backplane is easily configured to simplex mode by means of a simple switch
duplex to simplex) located on the top of the backplane itself.
Cord, AC Line, 20A, 250V, US 12'
235604-001
Cord, AC Line, 15A, 125V
235603-001
Cable, 10A, IEC320-C20 to IEC320-C19
NOTE:
NOTE: NOTE:
NOTE:
Power cord (295633-B22) connects ProLiant servers to PDUs or UPSs with
IEC320-C19 output connections.
295633-B22
Cable, 10A, IEC320-C14 to IEC320-C19 8FT
NOTE:
NOTE: NOTE:
NOTE:
Power cord (291034-B21) connects HP ProLiant DL580 G2 servers to PDUs
or UPSs with IEC320-C13 output connections. This power cord has been specifically
designed to work with the HP ProLiant DL580 G2 server. Please
NOTE
NOTENOTE
NOTE
the following
important precautions when deploying this power cord:
291034-B21
Use the cord only in conjunction with the HP ProLiant DL580 G2 server.
Use the cord to connect the HP ProLiant DL580 G2 server only to PDUs or
UPSs with IEC320-C13 output connections.
Do not use the cord with any other HP ProLiant or third party server.
Do not use the cord with any other office equipment or computers.
Do not use the cord as an extension cord.
Do not plug the cord into a wall outlet.
Failure to adhere to these precautions may invalidate the server warranty.
Cable, 10A, IEC320-C14 to IEC320-C19 10FT
NOTE:
NOTE: NOTE:
NOTE:
Power cord (310927-B21) connects HP ProLiant DL580 G2 servers to PDUs
or UPSs with IEC320-C13 output connections. This power cord has been specifically
designed to work with the HP ProLiant DL580 G2 server. Please
NOTE
NOTENOTE
NOTE
the following
important precautions when deploying this power cord:
310927-B21
QuickSpecs
HP ProLiant DL580 Generation 2 (G2)
HP ProLiant DL580 Generation 2 (G2)HP ProLiant DL580 Generation 2 (G2)
HP ProLiant DL580 Generation 2 (G2)
Options
DA - 11372 North America — Version 71 — November 7, 2005
Page 16