Condensed USER MANUAL FOR: SmartModule Express SMX945 Nordstrasse 11/F CH - 4542 Luterbach Tel.: ++41 (0)32 681 58 00 Fax: ++41 (0)32 681 58 01 Email: support@digitallogic.com Homepage: http://www.digitallogic.
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A For internal use only: File: Path: SMX945_Condensed_V1.0A.doc R:\HANDBUCH\smart\SMX945\SMX945_Condensed_V1.0A.doc COPYRIGHT 2007 BY DIGITAL-LOGIC AG This publication is protected by copyright and all rights are reserved.
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A Table of Contents 1. PREFACE .....................................................................................................................................................4 1.1. Trademarks ..................................................................................................................................... 4 1.2. Disclaimer ..................................................................................................................
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A 1. PREFACE The information contained in this manual has been carefully checked and is believed to be accurate; it is subject to change without notice. Product advances mean that some specifications may have changed. DIGITAL-LOGIC AG assumes no responsibility for any inaccuracies, or the consequences thereof, that may appear in this manual.
DIGITAL-LOGIC AG 1.5. SMX945 Condensed Manual V1.0A Recycling Information All components within this product fulfill the requirements of the RoHS (Restriction of Hazardous Substances Directive). The product is soldered with a lead free process. 1.6. Technical Support 1. Contact your local DIGITAL-LOGIC Technical Support, in your country. 2. Use the Internet Support Request form at http://support.digitallogic.
DIGITAL-LOGIC AG 1.8. SMX945 Condensed Manual V1.0A Explanation of Symbols CE Conformity This symbol indicates that the product described in this manual is in compliance with all applied CE standards. Caution, Electric Shock! This symbol and title warn of hazards due to electrical shocks (> 60V) when touching products or parts of them. Failure to observe the precautions indicated and/or prescribed by the law may endanger your life/health and/or result in damage to your equipment.
DIGITAL-LOGIC AG 1.9. SMX945 Condensed Manual V1.0A Applicable Documents and Standards The following publications are used in conjunction with this manual. When any of the referenced specifications are superseded by an approved revision, that revision shall apply. All documents may be obtained from their respective organizations. Advanced Configuration and Power Interface Specification Revision 2.
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A Smart Battery Data Specification Revision 1.1, December 11, 1998. www.sbs-forum.org System Management Bus (SMBus) Specification Version 2.0, August 3, 2000 Copyright © 1994, 1995, 1998, 2000 Duracell, Inc., Energizer Power Systems, Inc., Fujitsu, Ltd., Intel Corporation, Linear Technology Inc., Maxim Integrated Products, Mitsubishi Electric Semiconductor Company, PowerSmart, Inc., Toshiba Battery Co. Ltd., Unitrode Corporation, USAR Systems, Inc.
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A RoHS is often referred to as the "lead-free" directive but it restricts the use of the following substances: Lead Mercury Cadmium Chromium VI PBB and PBDE The maximum allowable concentration of any of the above mentioned substances is 0.1% (except for Cadmium, which is limited to 0.01%) by weight of homogeneous material.
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A 2. OVERVIEW 2.1. Standard Features The smartModuleExpress945 is a miniaturized PC system on chip unit incorporating the major elements of a PC/AT compatible computer. It includes standard PC/AT compatible elements, such as: 2.2.
DIGITAL-LOGIC AG 2.3. SMX945 Condensed Manual V1.0A Block Diagram * This function is disabled. A Macrovision license is required to enable it.
DIGITAL-LOGIC AG 2.4. SMX945 Condensed Manual V1.0A Specifications CPU CoreDuo / Celeron M Clock st 1 Level Cache nd 2 Level Cache Technology VCCCore @ 1.6GHz VCCCore @ 0.6GHz VCCCore @ deep sleep CPU-Bus AGTL+ Termination FSB Specification Intel Core Duo L2400 LV 2x 1.66GHz with 2MB L2-cache Intel Core 2 Duo L7400 LV 2x 1.66GHz with 4MB L2-cache Intel Celeron M423 ULV 1x 1.06GHz with 1MB L2-cache Intel Celeron M440 1x 1.86GHz with 1MB L2-cache 1GHz up to 1.
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A Intel 945GME Graphics PEG PEG Controller Alternative to the internal graphic controller Multiplexed with the SDVO signals Support Mode Voltage Signals Intel 82801DBM (ICH7DH) PCI-Bus EIDE-Bus SATA-Bus USB V2.0 APIC SMB FWH LPC Specification PEG 16 lanes 1.5Volt Differential 2.5Gbit/sec Sound IRQ Controller Timers Power Management Specification Supports PCI 2.2 with 6 resources 1x Ultra P-ATA 100 2 channels 150MByte/sec 8 channels USB INTEL I/O APIC V2.
DIGITAL-LOGIC AG Physical Characteristics Dimensions Weight PCB Thickness PCB Layer Operating Environment Relative Humidity Vibration Shock Operating Temperature Maximum Copper Temperature Storage Temperature EMI / EMC (IEC1131-2 refer MIL 461/462) ESD Electro Static Discharge REF Radiated Electromagnetic Field EFT Electric Fast Transient (Burst) SIR Surge Immunity Requirements High-Frequency Radiation SMX945 Condensed Manual V1.0A Specification Length: 117 mm +/- 0.1mm Depth: 70 mm +/- 0.
DIGITAL-LOGIC AG 2.5. SMX945 Condensed Manual V1.0A Examples of Ordering Codes Product Name SMX945-C423 SMX945-C440 SMX945-L2400 SMX945-L7400 Part Number 805360 805354 805350 805352 Description smartModuleExpress945, Celeron smartModuleExpress945, Celeron smartModuleExpress945, Core Duo smartModuleExpress945, Core 2 Duo M 423, 0MB RAM M 440, 0MB RAM L2400, 0MB RAM L7400, 0MB RAM These are only examples; for current ordering codes, please see the current price list. 2.6.
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A 3. PREPARATION Warning, ESD Sensitive Device! Place the embedded computer board on an isolated, ESD-protected surface. Also ensure that all equipment, tools and people are fully protected against ESD. 3.1. Print Detailed Manuals from the CD Note… Place the Product-CD into the CD-Drive of a personal computer with a connected printer. Open the CD; open the directory SMX945. Printout the following detailed manuals: 1.
DIGITAL-LOGIC AG 3.2. SMX945 Condensed Manual V1.0A Connect Peripherals to the Board Prepare the following peripherals: VGA Monitor (LCD or CRT) with a resolution up to 1024x768pixel PS2 Keyboard USB Mouse LAN-Cable, if available Hard disk or CompactFlash USB CD-Drive or Floppy drive Power supply with 12Volt and min. 30Watts 1. Connect the VGA-Monitor to the 15pin high density DSub-connector. 2. Connect the Keyboard to the PS/2 connector. 3.
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A 4. START UP / POWER OFF THE BOARD With the PWRBTN# signal, the system can be started. Activating this signal a second time will shut the system down. How to Activate PWRBTN# The PWRBTN# signal must be connected to a ground to be activated. Minimum activation time is 3 seconds for the controller to start/stop the system. A few seconds after powering up the board, the screen should display the BIOS initial messages/pictures.
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.
DIGITAL-LOGIC AG 4.1. SMX945 Condensed Manual V1.0A BIOS Setup Since the BIOS is auto-configuring during the start-up procedure, normally the user does not enter the BIOS setup. Manual setup is needed only to change the default settings. Please refer to the driver/software/BIOS manual “SMX945_BIOS” printed from the CD for the BIOS setup details. 4.2.
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A 5. INDEX A M Application Notes ....................................................... 15 Manual, How to Use It .................................................. 2 B O BIOS Setup ................................................................ 20 Block Diagram............................................................ 11 Boot Up the OS .......................................................... 20 BUS....................................................