User guide

Running the Array Configuration Utility
If your operating system is not listed, check your operating system
documentation or contact your operating system vendor before extending
logical drives.
To extend the capacity of a logical drive:
1. Click the logical drive that you want to extend.
2. Click the Drive menu.
3. Select Extend Logical Drive.
The Extend Logical Drive screen displays the current capacity and RAID overhead
of the selected logical drive (Figure 6-11).
Figure 6-11. Extend Logical Drive screen
4. Click the slider control to change (increase) the size of the logical drive.
You cannot reduce the size of the logical drive from this screen.
5. Click Done.
6. Save the logical drive by clicking the Controller menu and selecting the
Save Configuration option.
The logical drive will be restructured so that its data is preserved. Refer to the
status gauge at the lower right of the screen to monitor the progress.