User guide

Compaq StorageWorks RAID Array 4000 User Guide
The menu bar contains the following pull-down menus:
■ Controller—Use to select a controller, save a configuration, create an
array, and exit the program.
■ Array—Use to delete, modify, or expand the capacity of an array, and to
create logical drives and view array information.
■ Drive—Use to delete or modify logical drives and view drive
information.
■ View—Use to switch between the Physical Drive View and the Logical
Drive View in the configuration list box.
■ Help—Use to access online help.
The Controller Selection box is located in the top left corner of the Main
Configuration screen. Select this to see a list of the controllers installed in the
system. You can select a controller to view or to configure. The highlighted
controller is shown in detail in the View Configuration list box.
Figure 6-15. Controller Selection box
The Physical/Logical Configuration View box lists all the drives and arrays
configured for the selected controller. The name of the controller and the slot
in which it is installed are displayed next to each controller icon.