User guide

6 Compaq StorageWorks RAID Array 4000 User Guide
technology D-1
Fibre Channel
point-to-point D-2
standards
protocol layers D-9
Fibre Channel Arbitrated Loop See
FC-AL
Fibre Channel Array Controllers
FC-AL D-4
reconfiguring E-16
Fibre Channel Arrays
applying power 3-1
FC-AL D-4
front panel features 1-4
LEDs 1-4
logical drives 1-9
models 1-1
power switch 1-4
rear panel features 1-5
Fibre Channel Host
Adapter/P or E 2-2
Fibre Channel Storage Hubs 1-1,
2-2
applying power 3-1
boot order 2-3, 3-1
bypass switching D-2
components 3-1
connecting 2-3
FC-AL D-4, D-6
installing 2-3
location 2-16, 2-17
rack 2-16, 2-17
seven
bypass mode 4-6
installing 2-16
LEDs 4-6
supported 2-16
twelve
installing 2-17
LEDs 4-7
self test 4-7
Fibre host adapter
FC-AL D-4
LEDs 4-3
point-to-point D-3
Fibre host adapter
connecting 2-3
drivers supporting 2-3
installing 2-3
Fibre Host Adapter
installing 2-18
figures
begin capacity expansion by
adding more physical
drives E-14
bypass mode LEDs on the
Storage Hub 12 4-8
bypass mode LEDs on the
Storage Hub 7 4-6
data striping distributes data
across all physical
drives E-11
distributed data guarding
distributes redundant
data E-7
drive array with one logical
drive E-2
drive array with six physical
drives and two logical
drives E-3
drive array with two logical
drives E-2
drive failure LED 4-2
drive mirroring stores identical
copy of the data E-9
expanded array storage
capacity with a second
logical drive E-15
Fan Assembly LED 3-5, 4-9
Fibre Channel Arbitrated Loop
configuration D-5
Fibre Channel data frame
structure D-8
Fibre Channel Host
Adapter/E 4-3
Fibre Channel Host
Adapter/P 4-3
front panel LEDs 3-2
GBIC Installed LEDs on the
Storage Hub 12 4-7
GBIC Installed LEDs on the
Storage Hub 7 4-6
hard drive LEDs 3-6
hot-pluggable drive
replacement
conditions 4-25