User guide

8 Compaq StorageWorks RAID Array 4000 User Guide
effect on performance E-7, E-8
procedure 4-26
SCSI 1-13, 2-1
securing 2-15, 4-27
spare F-3
supported 1-2, 1-9
troubleshooting 4-2
upgrading E-16
hardware
configurations 1-10
failure 1-10, E-4, E-7
mounting 2-2, 2-10
rack-mounting 2-1
help
additional sources xi
Compaq website xii
Compq authorized resellers,
telephone numbers xii
technical support telephone
numbers xi
help, Array Configuration
Utility 6-4
hot-pluggability
definition 1-6
http://www.compaq.com xii
I/O
rates 1-10
standard 1-1
throughput D-1
icons
symbols on equipment x
IDs, SCSI See SCSI, IDs
illustrations
begin capacity expansion by
adding more physical
drives E-14
bypass mode LEDs on the
Storage Hub 12 4-8
bypass mode LEDs on the
Storage Hub 7 4-6
data striping distributes data
across all physical
drives E-11
distributed data guarding
distributes redundant
data E-7
drive array with one logical
drive E-2
drive array with six physical
drives and two logical
drives E-3
drive array with two logical
drives E-2
drive failure LED 4-2
drive mirroring stores identical
copy of the data E-9
expanded array storage
capacity with a second
logical drive E-15
Fan Assembly LED 3-5, 4-9
Fibre Channel Arbitrated Loop
configuration D-5
Fibre Channel data frame
structure D-8
Fibre Channel Host
Adapter/E 4-3
Fibre Channel Host
Adapter/P 4-3
front panel LEDs 3-2
GBIC Installed LEDs on the
Storage Hub 12 4-7
GBIC Installed LEDs on the
Storage Hub 7 4-6
hard drive LEDs 3-6
hot-pluggable drive
replacement
conditions 4-25
inserting the drive 4-27
installing the Fan
Assembly 4-23
installing the power
supply 4-21
installing the RA4000
Controller 4-12, 4-14
installing the redundant power
supply 5-3
latching the drive into
place 4-27
opening the drive tray
latches 4-26