User guide

Compaq StorageWorks RAID Array 4000 User Guide
To replace a drive:
Be sure that the Online and Drive Access LEDs are both OFF. See
Figure 4-10.
1. Squeeze the latches on the hard drive 1.
2. Pivot the ejector levers to the full open position 2.
1
1
1
1
2
2
Figure 4-28. Opening the drive tray latches
3. Pull the drive out of the storage system drive cage.
4. Open the latches fully on the replacement drive and insert the drive into
the same bay as the drive just removed, sliding it in as far as it will go.
Make sure the ejector levers are in the full open position to ensure a
correct latch.
Figure 4-29. Inserting the drive