User guide

Compaq StorageWorks RAID Array 4000 User Guide
4. Click the Done button to return to the Main Configuration screen. The
Logical Configuration View area should look similar to the following
figure.
Figure 6-6. Example Array - Logical Configuration View with one Array
5. Select the controller, then click the Create Array button to create
Array B.
6. Assign both 9.1-GB drives to the array, then click the Done button.
In this example, each array was created using drives from the same SCSI Port.
You can achieve better performance by selecting drives from both ports for an array,
assuming you installed the correct drives in both ports before you ran the Array
Configuration Utility.