HP EXAM HP2-T26 Prepare for HP Servicing HP BladeSystem Solutions 220 Total Questions: For More Information: http://www.test4prep.com/HP2-T26.html 1 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Question: 1 Which feature is supported by the zx2 chipset in the Integrity BL860c? A. hot spare and hot-plug of memory DIMMs B. up to 512GB of memory (not fully buffered DIMMs) C. memory DIMM error correction (chip sparing) D. 512-bit, 800MHz (800 MT/s, 1600MHz data rate) memory bus Answer: C Question: 2 Which processor type is used with the HP BL460c G6 Server Blade? A. Dual-Core Intel® Itanium® Processor B. Intel® Xeon® Processor C. HP PA-RISC FSB, double data rate D.
D. telnet E. ssl F. ssh Answer: A, D, F Question: 5 What is the maximum number of SB1760c Tape Blades that can be installed in a c7000 blade enclosure? A. 16 B. 8 C. 4 D. 2 Answer: B Question: 6 How does a c7000 enclosure retain air handling integrity when a server blade is removed? A. The enclosure design uses blank panels to prevent air loss. B. A blanking panel causes the air flow to reverse, allowing warmer air to escape. C. The enclosure uses a self-closing door to prevent air loss. D.
Question: 8 HOTSPOT Click on the component that provides remote enclosure management in c-Class enclosures. Answer: 4 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Question: 9 Which interconnect can be used with the Fibre Channel over Ethernet (FCoE) capability of the new G7 Series of c-Class blades? A. HP 1/10Gb-F Virtual Connect Ethernet B. HP Virtual Connect Flex-10 10Gb Ethernet C. Virtual Connect FlexFabric D. HP ProCurve 6120G/XG interconnect E. HP Virtual Connect FC Module Answer: C 5 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Question: 10 What happens when you turn the enclosure UID to "On" on the Insight Display of a c7000 enclosure? A. The rear enclosure UID LED illuminates and the color of the Insight Display changes to blue. B. The front enclosure UID LED illuminates and the color of the Insight Display changes to blue. C. The rear enclosure UID LED illuminates and the color of the Insight Display changes to green. D. The front enclosure UID LED illuminates and the color of the Insight Display changes to green.
Question: 14 Which HP c-Class server blades take up two c3000 enclosure server bays? (Select two.) A. BL860c B. BL870c C. BL685 G7 D. BL490 G6 E. BL2x220c G6 Answer: A, C Question: 15 DRAG DROP Place each server blade on its recommended application type. Answer: 7 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Question: 16 HOTSPOT Click on the SB600c All-in-One Storage Blade in the graphic. Answer: Pending 8 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Question: 17 Which HP blade comes with a license for Microsoft Cluster Server (MSCS)? A. BL490c B. BL870c C. X3800sb D. xw2x220c Answer: C Question: 18 DRAG DROP Place the preventive measure steps in the correct order. Answer: 9 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Question: 19 Which utilities can be used to scan for malware on a Windows server? (Choose two.) A. Snort B. Ad-Aware C. Postfix D. Microsoft Network Monitor E. Spybot Answer: B, C Question: 20 When should a performance baseline be captured? A. after the initial installation of the equipment, during normal daily operation B. after the initial installation of the equipment, during peak operating conditions C. before and after each step of the initial installation of the equipment D.
Question: 21 HOTSPOT Click the area of the graphic where you can view real time diagnostic error information. Answer: 11 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Question: 22 Which HP Insight Diagnostics log displays POST errors? A. Test Log B. Error Log C. Integrated Management Log (IML) D. Sys Log Answer: C Question: 23 What should you do to replace a defective Standby Onboard Administrator (OA) in a c7000 enclosure? A. Move the Active OA to Standby bay, then replace the OA. B. Replace the Standby OA after all server blades are powered off. C. Replace the Standby OA only while the enclosure is powered off. D.
Question: 24 A customer is experiencing intermittent storage connectivity issues in their BladeSystem environment. After collecting the log files from the external storage system and the interconnects, you suspect the problem is in the Onboard Administrator configuration. Which step should you take next in the troubleshooting process? A. Reset the Onboard Administrator to factory defaults. B. Develop an optimized action plan. C. Escalate the problem. D. Run the First Time Setup Wizard.
Question: 27 Which CLI commands can be used to determine if networking has been configured properly in Windows? (Select two.) A. netconfig B. netstat C. ipstat D. ipconfig E. ifconfig Answer: B, D Question: 28 What happens during a Virtual Connect configuration restore? A. The configuration restores without causing any service interruption to the server blades. B. There is service interruption during the restore of the configuration. C.
Question: 30 DRAG DROP Place the background color of Insight Display next to its description. Note: Not all colors are used. Answer: 15 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Question: 31 DRAG DROP Identify the correct enclosure DVD status for each enclosure. Answer: 16 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Question: 32 Which information can the user access from an HP Array Diagnostics Utility (ADU) report? (Select two.) A. array accelerator status B. outstanding I/Os C. Reserved Information Sector (RIS) data D. test connection rate Answer: A, C Question: 33 What provides information on the software inventory of a server and available updates? A. HP Subscribers Choice B. HP System Management Homepage (SMH) C. Version Control Agent (VCA) D.
Question: 35 A customer is experiencing drive encryption issues with a BL490c Server Blade running Microsoft Windows Server. The Trusted Platform Module (TPM) is suspected as the cause. What must be done to replace the TPM? (Select two.) A. The TPM must be cleared. B. BitLocker must be disabled. C. The TPM Visibility option must be set to hide so it is not visible to the OS. D. The TPM must be replaced, as it is a customer installable option. E. The TPM and system board must be replaced at the same time.
Question: 38 Refer to the exhibit below. From the main menu shown in the exhibit, which menu should you select from Insight Display to check the Onboard Administrator Service IP address? A. Health Summary B. Enclosure Settings C. Enclosure Info D. Blade or Port Info Answer: C Question: 39 Refer to the exhibit below. A customer reports that Insight Display shows five NICs installed in a half-height server blade, but a connection to only two of them can be established. What could cause this to happen? A.
Question: 40 How is a backup of the Onboard Administrator (OA) performed? A. by using the CLI of interconnect in bay 1 B. by using the GUI C. by copying the activeoa.cfg file to the USB drive D. by recording the configuration on a CD using CD-RW attached to the OA USB port Answer: B Question: 41 You have to update firmware of the Onboard Administrator (OA) but you have no access to the GUI. What is required to flash OA firmware from the CLI? A. FTP/TFTP server with OA firmware image available B.
Question: 43 Where do the default configurations settings for the HP Systems Insight Management agents reside on a Linux system? A. \hp\hpsmh\conf\smhpd.xml B. \hp\hpsmh\win_ia32\smhpd.xml C. \hp\hpsmh\smhpd.xml D. \hp\hpsmh\data\cgi-bin\smhpd.xml Answer: A Question: 44 When connected via a remote iLO session to a new ProLiant Server Blade, how should the system BIOS settings be configured? A. The system ROM should automatically configure the entire system, without the need for intervention. B.
Question: 46 Technician is installing HP ProLiant servers at different customer sites. Since the technician wants to have the ProLiant equipped with the latest firmware level available, what is the best solution? A. Before going onsite, the technician should download the latest SmartStart Firmware CD and use this SmartStart Firmware CD for deploying the latest firmware. B.
Question: 49 Which server blade is based on AMD Opteron Technology? A. SB600c B. BL685c C. BL2x220c D. BL860c Answer: B Question: 50 DRAG DROP Place the steps for verifying and updating firmware for the BL860c server in the correct order. Answer: 23 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Question: 51 Which services and benefits do HP CarePack Services provide? (Select three.) A. dedicated technical onsite technicians B. factory configuration C. onsite deployment of products D. legal advice for software problems E. a pay-per-use model for calls F. additional support and levels of availability Answer: B, C, F Question: 52 What does an HP warranty include? (Select two.) A. software support B. parts and labor C. downtime protection as needed D. flexible support levels E.
Question: 53 Which information is required for a warranty check for a BL490c G6 Server? (Select three.) A. country/region B. service agreement ID C. spare part number D. serial number E. date of purchase F. product number Answer: A, D, F Question: 54 Disk drive technology used in RAID storage creates logical drives from physical units. With RAID 5, how many physical I/O requests are generated for each logical write? A. three writes and one read B. two reads and two writes C. one read and three writes D.
Question: 56 Which capability does Intel QuickPath technology provide? A. automatically allows a processor core to run faster than the base operating frequency if it is operating below power, current, and temperature specification limits B. allows each processor core to feature an integrated memory controller and high-speed interconnect to deliver greater performance, bandwidth, and reliability C.
Question: 59 How many processor sockets does the HP BL870c c-Class Integrity Server Blade have? A. 2 B. 4 C. 8 D. 16 Answer: B Question: 60 A rack with a c7000 is to be relocated to a remote location. What should be used when moving the rack to ensure no damage will occur to the enclosure? A. packaging foam B. shipping bracket C. stabilization kit D. ballast kit Answer: B Question: 61 Which mezzanine card is compatible with the HP ProCurve 6120XG interconnect? A.
Question: 63 What is the default ASR timer value after the HP Server Health driver is loaded? A. 10 seconds B. 10 minutes C. 1 minute D. 1 hour Answer: B Question: 64 When installing half-height c-Class server blades in a c3000 rack enclosure, what is the recommended sequence for installing them into the server bays when viewed from the front of the enclosure? A. from top to bottom, then right to left B. from bottom to top, then right to left C. from top to bottom, then left to right D.
Question: 66 If time is critical and all memory tests in the HP Insight Diagnostics Offline Edition cannot be run, which memory tests should be run? (Select two.) A. address B. random address C. read D. noise Answer: B, D Question: 67 What do you use to access RBSU to retrieve information? A. F2 B. F8 C. F9 D. F12 Answer: C Question: 68 A BL490c G6 processor has been replaced. The customer wants the new processor to be tested for several hours before placing the server blade back in service.
Question: 69 Where can you find video clips of Field Replaceable Unit (FRU) removal/replacement procedures? A. HP Services Media Library B. HP Services FRU Replacement Library C. HP Enterprise Services Library D. HP Enterprise Video Library Answer: A Question: 70 Which statements are true about Online Spare memory banks? (Select two.) A. The first bank populated is considered the Online Spare bank. B. The last bank populated is considered the Online Spare bank. C.
Question: 72 A server blade has a memory error. All the LEDs in all the banks are illuminated. What should you do first to address this issue? A. Simultaneously replace the memory in all the banks. B. Replace the system board that the memory is connected to. C. Replace the processor, which is causing a false memory error. D. Replace one memory bank at a time. Answer: D Question: 73 A customer has an SB40c paired with a full height blade. The blade cannot access the SB40c storage.
Question: 75 When you try and boot a previously installed operating system, a BL495c G6 Server Blade freezes. What is the first step you should take when troubleshooting this problem? A. Load and try to boot the latest SmartStart CD. B. Use iLO to access the Integrated Management Log (IML) of the failing server blade. C. Load and try to run the HP Insight Diagnostics Online Edition. D. Use iLO to access the enclosure Onboard Administrator.
Question: 78 During HP SIM automatic discovery, many unmanageable systems and systems that do not need to be managed are discovered. What should you do to prevent this from happening? A. Power down all unwanted systems prior to the discovery phase so they will not be detected and added to the database. B. After all the systems are discovered, go back and delete the unwanted systems from the database. C. Remove the agents from the unwanted systems so HP SIM will reject them during discovery. D.
Question: 81 The Onboard Administrator in an HP BladeSystem enclosure detects an error condition and the enclosure UID is on. Which color does the Insight Display illuminate? A. amber B. flashing amber C. flashing blue D. blue Answer: D Question: 82 A customer has a ProLiant BL680c G5 running a database application that crashes when one of the eight installed memory modules fails. The bad memory is replaced. How can the failure be prevented in the future? A.
Question: 84 Which serial communication parameters must be set on the terminal emulator to connect the Onboard Administrator? A. 9600 E, 8, 1 B. 19200 E, 7, 1 C. 19200 N, 7, 1 D. 9600 N, 8, 1 Answer: D Question: 85 The administrator password for the Onboard Administrator (OA) module has been lost. How does the system administrator recover this password? (Select three.) A. select the factory reset option during reboot B. press and hold the OA reset button for 5 seconds C.
Question: 87 Which action prevents changing settings in the c7000 Insight Display? A. setting a PIN B. enabling a Pass Phrase C. removing Insight Display from the c7000 enclosure D. turning On the Insight Display lock feature Answer: A Question: 88 How can you generate a report that contains a detailed set of information about a specific enclosure including configuration and event logs? A. Use HP System Management Homepage of a blade in bay 1. B.
Question: 91 DRAG DROP Place each deployment method next to its description. Answer: 37 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Question: 92 Which feature of the Ultrium 448 Tape Blade allows quick recovery of the operating system? A. ACU B. ORCA C. OBDR D. RBSU Answer: C Question: 93 What should you do to determine the list of hotfixes installed on a Windows server? A. Run regedit and look under HKLM\Software\Microsoft\Windows\CurrentVersion\HotFix. B. Open the Windows Update applet in the control panel. C. Use the systeminfo command. D. Right-click on My Computer and select the Advanced tab.
Question: 96 Which firmware can be upgraded using HP SUM running on a Windows-based ProLiant? A. Intel NIC B. Emulex Fibre HBA C. HP SAS hard drive not connected to Smart Array Controller D. HP SATA hard drive not connected to Smart Array Controller Answer: B Question: 97 Which HP solution can be used to integrate a "phone-home" solution for an HP BladeSystem customer? A. HP Warranty and Service Advisor B. HP Warranty and Service Automation C. HP Insight Remote Support Standard D.
Question: 100 How does a c7000 enclosure retain air handling integrity when a fan is removed? A. The enclosure design uses blank panels to prevent air loss. B. A blanking panel causes the air flow to reverse, allowing warmer air to escape. C. The enclosure uses a self-closing door to prevent air loss. D. The fans increase in revolutions per minute to increase air volume. Answer: C Question: 101 Which server blade series is optimized for HPC clusters? A. BL2xx Series B. BL4xx Series C. BL6xx Series D.
Question: 103 Why is it considered a best practice to use tools such as HP Smart Update Manager (SUM) and Virtual Connect Support Utility (VCSU) to deploy firmware components? A. These tools check the dependencies and limitations. B. The tools are compatible with all versions of firmware. C. These are the only tools that can be used to work with Virtual Connect Enterprise Utility (VCEU). D. These tools are version compatible by design.
Question: 106 Which Windows commands allow you to get the operating system's version, build, and service patch level? (Select two.) A. winver B. msconfig C. patch D. msinfo32 E. swlist F. uname Answer: B, D Question: 107 Which command should you use to connect to the CLI interface of an HP ProCurve Blade Switch through the Onboard Administrator? A. connect interconnect B. connect switch C. connect D.
Answer: D Explanation: Reference: http://www.scribd.com/doc/48647073/3/Overview (page 114, second paragraph on the page) Question: 109 Which tool can be used to upgrade the firmware of Virtual Connect Ethernet module? (Select two.) A. HP SUM B. OA C. VCSU D. VCEM E. HP SIM Answer: C, E Explanation: Reference: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01611221HYPERLI NK "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.
Question: 110 Which tool can be used to verify that SNMP events appear in HP SIM from a blade server running Windows 2008? A. Onboard Administrator B. System Management Homepage C. HP SNMP Agent D. Integrated Lights-Out Answer: C Question: 111 How should you save a Virtual Connect configuration? A. from CLI: show all > cfg.txt B. enclosure setting, configuration scripts, inventory C. enclosure setting, configuration scripts, show config, save D.
Question: 113 Which feature should you enable in RBSU in a G7 server to reduce processor power usage and improve overall performance in some applications? A. Intel Hyperthreading Options B. HP Dynamic Power Savings Mode C. Processor Core Disable D. HP Static Low Power Mode E. OS Control Mode Answer: C Explanation: Reference: http://www.scribd.com/doc/46311510/10/Processor-Options-G7-servers (p.
Explanation: Reference: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c03293145/c03293145.pdf (Page 10, second bulleted point on the page) Question: 116 What is the advantage of Solid State Drive over I/O Accelerator? A. It offers higher reliability. B. It is bootable. C. It has a longer life span. D. It has higher throughput. Answer: A Question: 117 Which memory configuration types are supported in the Gen8 ProLiant Blade servers? (Select two.) A. DDR2 B. SODIMM C. SDIMM D. RDIMM E.
Question: 119 Which benefit is provided by having identical Interconnect modules in adjacent bays of the c7000 enclosure? A. reduced power requirements B. dynamic IO bandwidth C. improved uplink failure detection D. redundant IO capabilities Answer: D Explanation: Reference: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00816246/c00816246.pdf 15, third paragraph on the page) (page Question: 120 HP standard warranties support the HP hardware. What are HP Care Packs designed to support? A.
Explanation: Reference: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01857420/c01857420.pdf (page 4, HP Smart Start Manager) Question: 122 A customer is experiencing a pre-failure alarm of the UPS Battery on a UPS that is almost one year old. Which statement is correct? A. The battery replacement is included in the warranty. B. The customer must contact the manufacturer of the battery for replacement. C.
Explanation: Reference: http://hpproliant.blogspot.com/2012/06/install-windows-sbs-2011-in-hp-gen8.html Question: 125 Which external storage type allows a customer to share common LUNs between servers and booting operating systems? A. NAS B. SAN C. MDS D. DAS Answer: B Question: 126 What is the effect of a lost or misplaced Trusted Platform Module (TPM) key? A. The system requests the Administrator password. B. The system enters diagnostic mode. C. The system will not boot. D. Data loss may occur.
Question: 128 Which mezzanine card allows Fibre Channel and Ethernet connectivity through the same interconnect module? A. Brocade 804 8Gb FC HBA for HP BladeSystem c-Class B. HP NC382m Dual Port 1GbE Multifunction BL-c Adapter C. HP NC552m 10Gb 2-port Flex-10 Ethernet Adapter D. HP NC553m 10Gb 2-port FlexFabric Adapter Answer: B Question: 129 What happens when you mix low-reduced DIMMs (LRDIMM) and unbuffered DIMMs (UDIMM)? A. The blade server will not boot up. B. The blade server boots up in a loop mode.
Question: 131 Where does Active Health collect the data from? A. Event Log B. SMH C. IML D. iLO Answer: D Explanation: Reference: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c03207602/c03207602.pdf (page 2, read the introduction especially the bulleted points) Question: 132 HOTSPOT Match the appropriate HP best practices rack location with each listed component to configure the rack shown. 51 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Answer: Location 1 – C7000 enclosure Location 2 – rack stabilization kit Location 3 – network switch Location 4 – UPS 8000 /3 Question: 133 You have a c7000 enclosure with 1 GB Pass-Thru modules. You cannot get to the network from any of the blades. What should you verify first for proper connectivity to the network? A. external switch set to half duplex B. interconnect link between the Pass-Thru modules C. external switch supports Gigabit speed D.
Question: 134 Which statement describes the features of Service Pack for ProLiants (SPP)? A. SPP is a combination of the PSPs and the HP SmartUpdate Firmware DVD. B. SPP is supported only on Windows Servers. C. SPP requires configuration through RBSU. D. SPP is the replacement for the Service and Diagnostics tools. Answer: A Question: 135 After replacing the SmartArray controller cache battery module, you need to verify that it is charging. How can this be accomplished? A. Use F10 and go into RBSU. B.
Question: 136 When installing DDR3 memory DIMMs for Gen8 servers shown, which order of slots should be followed? A. No specific slot order is required. B. slots A, B, C, D C. slots I.J, K. L D. slots A. B.L.K Answer: B Explanation: Reference: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c03293145/c03293145.pdf (page 11 and 12) Question: 137 A customer replaced the memory DIMM several times in the same slot on a BL460c G7 Server. What are the next troubleshooting steps? (Select two.) A.
Question: 138 You are doing troubleshooting and need to access a single server blade console. Which configuration option is the best to use? A. Connect an SUV to the KVM module. B. Enable the iLO Advanced license in RBSU. C. Enable graphics mezzanine support. D. Connect an SUV cable to the blade. Answer: D Question: 139 After replacement of a BL460c G7 system board, the server is unable to connect to an external shared storage through the SAS interface.
A. 2 B. 4 C. 6 D. 8 Answer: A 56 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Question: 141 You installed an FC HBA in mezzanine slot 2 of a BL460c G6 in a c7000 enclosure. In which interconnect bays should the FC interconnect be installed? A. 1 and 2 B. 3 and 4 C. 5 and 6 D. 7 and 8 Answer: B Question: 142 Where can you verify the status of an external DVD-ROM drive in a c7000 enclosure? A. Active Health Log B. Virtual SAS Manager C. Integrated Management Log D. Insight Display Answer: D Question: 143 You are installing a new HP BladeSystem c7000 enclosure.
Question: 144 A customer is installing a new drive in a BL460c Gen8. None of the LEDs on the drive are lit. What is a possible cause? A. The customer used a third party drive. B. Dynamic Power Saving disables LEDs. C. The backplane port is disabled in system ROM. D. There is no activity on the drive. Answer: D Question: 145 What should you use to check the overall health status of all the BL460c Gen8 servers you recently installed in a c7000 enclosure? A. Power Manager B. Array Configuration Utility C.
Question: 147 Which statements are true about Agentless Management? (Select two.) A. Agentless Management Service is installed as a daemon in HP-UX. B. Agentless Management is installed using Ignite UX. C. Agentless Management is only supported on Integrity Blades. D. The Agentless Management Service provides OS information to ilo E. Agentless Management is only supported on Gen8 servers. Answer: D, E Explanation: Reference: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c03306157/c03306157.
Reference: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02225412/c02225412.pdf (page 8, first paragraph) Question: 150 After a BL460c G7 system board replacement due to a mismatched processor support error, the engineer performs a firmware verification and update process. As a preventive measure, which firmware must be checked and updated, if required? A. the primary firmware on the system board B. both the primary and backup system firmware on the system board C.
Explanation: Reference: http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01327127/c01327127.pdf (page 145) Question: 153 HOTSPOT Click the area of the graphic where you view diagnostic test error information. Answer: 61 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Question: 154 When using the Configure or Repair Agent capability of HP SIM 7.0, which software component is unsupported for G7 servers and earlier? A. WBEMMMI Provider B. Agent Management Service C. OpenSSH for Windows D. SNMP Agent Answer: B Question: 155 After replacing a system board on a ProLiant BL460c G7, which steps are required to ensure that the license status remains intact in an HP Matrix Operating Environment? (Select two.) A.
Question: 156 As an administrator, you are required to update the firmware for BladeSystem products. You have determined that the VC firmware is later than 1.34 and that the servers within the blade chassis already have an OS loaded on them. What is the recommended order to update the BladeSystem products? A. OA, server blades (online/offline), then VC B. server blades (online/offline). VC then OA C. VC, OA, then server blades (online/offline) D.
Explanation: Reference: http://webcache.googleusercontent.com/search?q=cache:R4XUUoht8rwJ:bizsupport1.austin.hp.co m/bizsupport/TechSupport/Document.jsp%3FobjectID%3Dc01209399%26lang%3Den%26cc%3Dus% 26taskId%3D101%26prodSeriesId%3D3884098%26printver%3Dtrue+HYPERLINK "http://webcache.googleusercontent.com/search?q=cache:R4XUUoht8rwJ:bizsupport1.austin.hp.co m/bizsupport/TechSupport/Document.jsp"&HYPERLINK "http://webcache.googleusercontent.com/search?q=cache:R4XUUoht8rwJ:bizsupport1.austin.hp.
Explanation: Reference: http://webshop.koneo.se/pdf/98EEF8CE-A65F-461E-BD0B-6771CFE64052.pdf (page 26, last sub-bulleted point) Question: 161 When connected to the c7000 or c3000 enclosure service port how does a Windows-based laptop configured for DHCP acquire its IP address? A. The laptop will receive an address in the 192.168.x.x address range from the DHCP server within the enclosure. B. The laptop will receive an address in the 169.254.x.x address range from the DHCP server within the enclosure. C.
Question: 164 Which new technologies are introduced in the new G7 Series c-Class server blades? (Select two) A. Fully Buffered DIMMs B. Flex-10 Ethernet support C. 10Gb Ethernet on-board D. FlexFabric support E. Internal MicroSD card slot Answer: C, D Question: 165 How often does the Hardware Status Polling task within HP SIM check communications status with all discovered devices? A. Servers and non-servers are checked every five minutes B. Servers and non-servers are checked every ten minutes C.
Question: 168 Which utility should you use to gather detailed information about SNMP traffic on a Windows server? A. Microsoft Performance Monitor B. Microsoft Network Monitor C. Microsoft SNMP Monitor D. Microsoft System Event Viewer Answer: B Question: 169 When pairing an SB40c Storage Blade with an BL680c G6, in which mezzanine card slot will the Mezzanine Pass-Thru card be installed? A. 1 B. 2 C. 3 D.
Question: 172 HOTSPOT Click the area of the graphic where you view diagnostic test error information. Answer: 68 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Question: 173 Which benefits does the new DDR-3 memory technology offer? (Select three.) A. ability to intermix registered and unregistered DIMMs B. bandwidth increased to 1333MHz C. address parity detection D. bandwidth increased to 667 MHz E. smaller footprint for increased density F. larger footprint for increased storage Answer: A, C, E Explanation: Reference: http://www.google.com.pk/url?sa=tHYPERLINK "http://www.google.com.
detection&source=web&cd=1&ved=0CBsQFjAA&url=http:/%2"q=ddr%203%20smaller%20address% 20parity%20detectionHYPERLINK "http://www.google.com.pk/url?sa=t&rct=j&q=ddr 3 smaller address parity detection&source=web&cd=1&ved=0CBsQFjAA&url=http:/%2"&HYPERLINK "http://www.google.com.pk/url?sa=t&rct=j&q=ddr 3 smaller address parity detection&source=web&cd=1&ved=0CBsQFjAA&url=http:/%2"source=webHYPERLINK "http://www.google.com.
"http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120 &prodSeriesId=3884098&prodTypeId=15351&ob"cc=usHYPERLINK "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120 &prodSeriesId=3884098&prodTypeId=15351&ob"&HYPERLINK "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120 &prodSeriesId=3884098&prodTypeId=15351&ob"taskId=120HYPERLINK "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.
Question: 176 HOTSPOT Click on an Onboard Administrator module in the graphic. Answer: Explanation: Reference: http://h18000.www1.hp.com/products/quickspecs/archives_North_America/12517_na_v3/12517_ na.HTML 72 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Question: 177 HOTSPOT Click on the Ethernet pass-thru module in the graphic. Answer: 73 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Question: 178 Which HP mezzanine option supports hardware RAID for Solid State Drives (SSDs)? A. HP PCI Express Mezzanine Pass-Thru card B. HP StorageWorks IO Accelerator C. HP Smart Array P712m Controller D. HP Smart Array P700m Controller Answer: C Explanation: Reference: http://mediapool.getthespec.com/media.pdf?m=U%2BgvdbRuDWUV6mUSMLjcgg%3D%3DHYPERLI NK "http://mediapool.getthespec.com/media.pdf?m=U+gvdbRuDWUV6mUSMLjcgg==&v=PD"&HYPERLI NK "http://mediapool.getthespec.com/media.
Explanation: Reference: http://h18000.www1.hp.com/products/quickspecs/12753_div/12753_div.PDF Question: 181 What can be used to prevent the mixing of hot and cold air to improve the cooling efficiency of cClass enclosures installed in the 10000 Series cabinet? (Select two.) A. HP Rack Coupling Kit B. HP 1U Universal Filler Panel C. HP 10000 Series Rack Airflow Optimization Kit D. HP 10000 G2 Series Front Doors Answer: C Explanation: Reference: http://h18000.www1.hp.
Question: 183 What should a system engineer use to back up the configuration for a BladeSystem enclosure? (Select two.) A. Onboard Administrator GUI - Configuration Scripts option B. Onboard Administrator GUI - Rack Overview option C. Insight Display - Enclosure Settings D. Insight Display - USB Menu E. Insight Display - Enclosure Info Answer: B, C Question: 184 A customer has a ProLiant BL680c G5 Server Blade with an Integrated HP Smart Array P400i Controller with 256MB ECC protected cache.
Question: 186 A customer is having intermittent system problems a short time after deploying a new server blade. Which action should you take? A. Open a case with HP Technical Support. B. Replace the system board. C. Replace the system memory. D. Update the firmware to the latest levels. Answer: D Question: 187 The customer has a single Onboard Administrator (OA), which needs to be replaced. What should you do before you replace the OA? A. Access the OA GUI or CLI and capture a system log. B.
"http://www.google.com.pk/url?sa=t&rct=j&q=hp bladesystem c-class enclosuretroubleshooting guide&source=web&cd=1&ved=0CB8QFjAA&u"&HYPERLINK "http://www.google.com.pk/url?sa=t&rct=j&q=hp bladesystem c-class enclosuretroubleshooting guide&source=web&cd=1&ved=0CB8QFjAA&u"q=hp%20bladesystem%20cclass%20enclosuretroubleshooting%20guideHYPERLINK "http://www.google.com.pk/url?sa=t&rct=j&q=hp bladesystem c-class enclosuretroubleshooting guide&source=web&cd=1&ved=0CB8QFjAA&u"&HYPERLINK "http://www.google.com.
Question: 190 What is used to automatically download software updates from HP? A. HP Subscribers Choice B. Version Control Agent (VCA) C. HP Systems Insight Manager (HP SIM) D. Version Control Repository Manager (VCRM) Answer: B Explanation: Reference: http://h18013.www1.hp.com/products/servers/management/hpsim/index.html?jumpid=go/hpsim Question: 191 Which memory tests can be run using HP Insight Diagnostics Offline Edition? (Select three.) A. loop B. complete C. quick D. random E.
Question: 193 You are preparing to replace a system board on a BL680c. What should you do first? A. Remove the disk drive cage. B. Remove the cover. C. Remove the processors. D. Connect the ESD strap. Answer: D Question: 194 The customer replaced a server blade that had been backed up to an Ultrium 448 Tape Drive. How should you restore the server blade and have it fully functional? A. During POST, you select F9 to restore from tape. B.
Explanation: Reference: http://sysdoc.doors.ch/HP/SERVER/ML%20Tower%20Server/HP%20PROLIANT%20ML310%20G2/34 7563-003_RBSU3_UG.pdf Question: 196 Which statement is true about creating a repository for implementing Version Control Repository Manager (VCRM)? A. There can be only one repository in the customer's environment. B. Servers with Version Control Agents (VCAs) must reside on the same subnet as the repository C. There can be multiple repositories in the customer's environment. D.
Answer: 82 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Question: 199 Which statement is true about the background color of the Insight Display? A. If there is an error detected in the Insight Display, the background color will be amber regardless of the status of the enclosure UID indication. B. If the enclosure UID is active, the Insight Display background color will be blue. C. An Insight Display background color of green will override a red error indication. D. The enclosure UID cannot be enabled if there is an error detected by the Onboard Administrator.
Question: 202 What is required to recover from a failed Onboard Administrator (OA) firmware upgrade? (Select three.) A. OA firmware in a .bin file B. keyboard and monitor attached to the KVM port of OA C. a DHCP and FTP server accessible by OA D. a bootable USB key with the latest OA firmware E. local access to the enclosure Answer: B, D, E Question: 203 What can be used to reboot the Active or Standby Onboard Administrator (OA) module? A. ASR implemented on the OA level B. enclosure link-down port C.
Question: 206 Which command should you use to gather information about the software patches installed on a Linux server? A. sysinfo B. rpm C. swlist D. patch Answer: C Question: 207 What are features of HP iLO Advanced Pack for HP BladeSystems? (Select three.) A. Directory Services Integration B. dedicated NIC C. virtual unit indicator D. multi-factor authentication E. virtual media Answer: C, D, E Question: 208 Which iLO 2 features were removed in iLO 3? (Select two.) A. virtual KVM B. virtual media C.
Question: 209 DRAG DROP Answer: Question: 210 Which resource can be used to identify the warranty status of an HP BL460c G6 Server Blade? A. IT Resource Center B. HP Service Advisory C. HP Onboard Administrator D. HP Service Dashboard Answer: D 86 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Question: 211 DRAG DROP Indicate what is included in an HP warranty. 87 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
Answer: Question: 212 A customer has a c7000 enclosure that is fully populated with BL680c blades. Two months after the initial installation, the rack initiates a thermal shutdown. When diagnosing the problem, you find there is not enough space to get behind the unit. You pull all the units out but find no problems with the chassis, blades, or their cooling systems. What is a potential cause for the thermal shutdown? A. The rack is too close to the cold air outlet.
Question: 213 You need to capture the configuration and support dump of several Virtual Connect domains. Which tool can be used to perform this action from a central system? A. Insight Control B. Virtual Connect Enterprise Manager C. Virtual Connect Support Utility D. Systems Insight Manager Answer: B, C Explanation: Reference: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=enHYPERLINK "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.
Question: 215 Both the c3000 and c7000 chassis have a capacity for a maximum of six power supplies. Which feature does the c3000 have that differentiates it? A. 2400W power supplies B. 12 v DC output C. 200-240VAC D. 1200W power supplies Answer: B Question: 216 After executing a troubleshooting plan, which tools may provide indications of a successful remedy in step 5 of the 6-step HP Troubleshooting Methodology? (Select two.) A. HP Screwdriver Toolkit B. Integrated Management Log (IML) C. MSDN Toolkit D.
Question: 218 A c7000 enclosure is fully populated with power supplies. Each power supply will have 2400W available if the N+1 power mode is configured. What is the total amount of available power? A. 7200W B. 12000W C. 14400W D. 16800W Answer: C Explanation: Reference: http://boardreader.com/thread/Enclosure_Inadequate_Power_To_Power_On_N_6maf9Xvml1.html A C7000 enclosure can be fully populated with 6 power supplies. If you multiply 2400 by 6, you will get the answer.
Thank You for Trying Our Product HP EXAM HP2-T26 Prepare for HP Servicing HP BladeSystem Solutions 220 Total Questions: For More Information: http://www.test4prep.com/HP2-T26.html 92 Get Complete Collection of HP2-T26 Exam's Question and Answers. http://www.Test4Prep.
