Installation manual

Santa Fe CN-M5
Installation manual
Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If
unsure of expertise required, please consult a qualified installation tech.
2
- Follow installation manual instructions carefully. Installer must careful to not cause interference between Navigator System c
abling and active / passive car safety device (Ex: Air bags, seat belts, indicators, etc…)
- Turn OFF the radio.
- Before any attempt of component removal, the installer must disconnect the vehicle battery and isolate the ends of the cable
.
- Do not attempt this installation operation if there are missing components. Please check the bill of materials carefully to ens
ure the kit is complete.
- Installation requires careful attention. If you have concerns about your abilities to perform delicate operations, then do not b
egin the installation.
- The car must be secured to not move during installation. Parking brake must be engaged at all times.
- Operation should be made in a clean, safe and well ventilated environment without trip hazards and slippery floors
- Do not install by yourself if you do not have qualifications and/or tools to perform the retrofit. You may damage the car’s co
mponents and/or the Navigator if not professionally installed.
- Poor installation can result in poor performance, personal injuries and will immediately void the factory warranty.
- Do not install the Navigator in a position that blocks the driver's view or hinders safe vehicle operation.