Installation manual

Santa Fe CN-M5

Installation manual

Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If

unsure of expertise required, please consult a qualified installation tech.

Remove the 6 front panel

retaining screw as shown.

(2 opposite side)

To detach the front panel

completely from the radio,

there are 8 retaining tabs that

retain the radio panel in ( 2 on

bottom, 2 on top and 2 either

side) . GENTLY lift these up a

little (DO NOT SNAP THEM OFF)

and pry the radio fascia clear

enough to allow access to the

cables on the rear. A second flat

screw driver might help to keep

the clips released while

unclipping others.