Installation manual

Santa Fe CN-M5
Installation manual
Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If
unsure of expertise required, please consult a qualified installation tech.
41
Run the flat ribbon thru the new
face plate carefully. Make sure not
bend the flat ribbon.
Then assemble the new face plate
and locate it using the embosses
circled. Screw (3) the face plate
starting by the opposite corners to
make sure the radio body is
square.
Place a screw as shown, this will
be use to ground the CN-M5
reverse camera circuit.
Screw the CD player at the top of
the slots as shown using the small
screws reserved separately.
Proceed with the flat ribbon install
Next page…