Network Router User Manual

Page 114
The access point can automatically calculate the values of the parameters to
input based on the distance between your access point and the other wireless
device. Enter the distance in meters and click on the
S
S
h
h
o
o
w
w
R
R
e
e
f
f
e
e
r
r
e
e
n
n
c
c
e
e
D
D
a
a
t
t
a
a
button.
You can enter the parameters based on the recommended values in the pop-
up window, click on the
A
A
p
p
p
p
l
l
y
y button to update the changes.
Long Distance
Parameters
Description
Outdoor If set to Enable, the Outdoor parameters will be
configured for outdoor communication over short or
long distances as specified, it is disabled by default.
Distance Determines the distance between your access point
and the remote access point in meters.
Slot Time The amount of time is divided and each unit of time is
called one slot time.
ACK Timeout Determines the timeout allowed for the sending client
to receive the acknowledgment response from the
receiving client. If no acknowledgment packet is
received within this period, the sender will assume the
receiver has not received the packet and will attempt
to resend.
CTS Timeout Clear-to-Send Timeout is the time the wireless sender
will wait for a CTS packet signaling that the channel is
idle and it can start data transmission. If no CTS packet
is received within this period, the sender will assume the
channel is busy and will wait before trying to send
again.