Network Router User Manual

ManualsBrandsCompex Systems ManualsNetwork RouterWPE54AG

7. Popis zařízení

Bod Popis

žlutá Compex WPE54AG je

připojen rychlostí

10Mbps.

1 LAN Link/Act

LED

zelená Compex WPE54AG je

připojen rychlostí

100Mbps.

zelená K bezdrátové síti je

připojen více než 1

klient.

2 WLAN Link/Act

LED

blikající zelená Pohyb dat po

bezdrátové síti.

zelená Zařízení je v režimu

access point nebo

gateway.

blikající zelená Zařízení nabíhá.

3 Diagnostická

LED

zhasnutá Zařízení je v klientském

módu.

modrá Zařízení je připojeno

k napájení.

4 Napájecí LED

zhasnutá Zařízení je vypnuto.

5 Externí Anténa Otočná anténa

6 LAN RJ45

Ethernet Port

Using RJ45 Ethernet cable for connection.

7 DC 3.3V 3A Napájecí port 3.3VDC

8 Reset tlačítko Stiskněte tlačítko:

 2s pro restart zařízení

 2s až 10s pro resete do výchozího

nastavení

 > 10s pro změnu operačního módu

Disclaimer: Compex, Inc. provides this guide without warranty of any kind, either expressed or implied,

including but not limited to the implied warranties of merchantability and fitness for a particular purpose.

Compex, Inc. may make improvements and/or changes to the product and/or specifications of the product

described in this guide, without prior notice. Compex, Inc will not be liable for any technical inaccuracies or

typographical errors found in this guide. Changes are periodically made to the information contained herein

and will be incorporated into later versions of the guide. The information contained is subject to change

without prior notice.

Trademark Information: Compex

, ReadyLINK

and MicroHub

are registered trademarks of Compex,

Inc. Microsoft Windows and the Windows logo are the trademarks of Microsoft Corp. NetWare is the

registered trademark of Novell Inc. All other brand and product names are trademarks or registered

trademarks of their respective owners.

Notice: Copyrights

without prior permission of Compex, Inc. is prohibited, except as allowed under the copyright laws.

Manual Revision by Ann

Manual Number: M-0428-V1.2C Verze 1.2, Únor 2005

FCC NOTICE: This device has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This device generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio or television reception, the user is

encouraged to try to correct the interference by one or more of the following measures:



Reorient or relocate the receiving antenna.

Connect the computer into an outlet on a

circuit different from that to which the

receiver is connected.



Increase the separation between the computer and

receiver.

Consult the dealer or an experienced radio / TV

technician for help.

Caution: Any changes or modifications not expressly approved by the grantee of this device could void the

user's authority to operate the equipment.

FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1)

(2)

This device may not cause harmful interference, and

This device must accept any interference received, including interference that may cause undesired

operation.

Products that contain a radio transmitter are labeled with FCC ID and may also carry the FCC logo.

Caution: Exposure to Radio Frequency Radiation.

To comply with the FCC RF exposure compliance requirements, the following antenna installation and device

operating configurations must be satisfied:

For configurations using the integral antenna, the separation distance between the antenna(s) and any

person’s body (including hands, wrists, feet and ankles) must be at least 2.5cm (1 inch).

For configurations using an approved external antenna, the separation distance between the antenna and

any person’s body (including hands, wrists, feet and ankles) must be at least 20cm (8 inch).

The transmitter shall not be collocated with other transmitters or antennas.

ICES 003 Statement

This Class B digital apparatus complies with Canadian ICES-003.

DECLARATION OF CONFORMITY: Compex, Inc. declares that the product:

Product Name: Compex Wireless-A/G Dual-Band Network Access Point

Model No.: WPE54AG conforms to the following Product Standards:

Radiated Emission Standards: ETSI EN 300 328-2: July 2000; FCC: 47 CFR Part 15, Subpart B, ANSI

C63.4-1992; 47 CFR Part 15, Subpart C (Section 15.247), ANSI C63.4-1992.

Conducted Emission Standards: ETS 300 826: Nov. 1997.

Immunity Standards: IEC 801-2; IEC 801-3; IEC 801-4

Low Voltage Directive: EN 60 950:1992+A1: 1993+A2: 1993+A3; 1995+A4; 1996+A11: 1997

Therefore, this product is in conformity with the following regional standards: FCC Class B – following the

provisions of FCC Part 15 directive; CE Mark – following the provisions of the EC directive.

Manufacturer’s Name: Compex, Inc.

Address:840 Columbia Street , Suite B

Brea, CA 92821, USA

European Contact & Technical Support

ReadyLINK Networktechnology GmbH,

Albert Einstein Straβe 34/M21,

63322 Rödermark, Germany

Fax: ++49 (60) 749-0668

WARRANTY REGISTRATION CARD

[M-0088-V2.4C]

To activate the warranty, please complete this card and return to Compex within ninety

(90) days from the date of purchase.

Please e-mail this warranty card to support@compex.com.sg.

Product: Purchase Date: Model: Serial No:

Name: E-mail:

Company:

Email:

Postal/Zip Code: Country:

Phone: ( )

Note:

For purchases within U.S.A and Canada, please fax to Compex, Inc. at (714) 482 0332

For purchases outside U.S.A and Canada, please fax to Compex Systems Pte Ltd at (65) 6280-

9947

----



-- -Cut along the dotted line-----



-----Cut along the dotted line-----



-----Cut along the dotted line-----



---- --



----Cut along the dotted line----



----Cut along the dotted line----



--- Cut along the dotted line-----



------ Cut along the dotted line-----

6 7 8 5