- Complex WPE54G (Standard) Wireless-G Network Access Point Quick Install Guide

Chapter 4 TCP/IP Configuration

Select the radio button for Use the

following IP address. Enter the IP

Address and Subnet Mask as

192.168.168.X and 255.255.255.0,

where X can be any number from 2

to 254, except for 1. In this example,

we are using 192.168.168.160 as the

static IP Address.

Click on OK to close all windows.

Next, in order to check if the IP address has been correctly assigned to your

PC, go to Start menu, Accessories, select Command Prompt and type the

command ipconfig/all.

Your PC is now ready to configure Compex WPE54G. Please refer to the User’s

Manual in the Product CD for more details on configuring Compex WPE54G.