- Complex WPE54G (Standard) Wireless-G Network Access Point Quick Install Guide

Chapter 3 Access to Web-based Interface
7
Access to the Web interface manually
If you wish to access to the web interface manually, you need to configure the
TCP/IP of your PC. Refer to Chapter 4 for detail.
If you have forgotten the IP address of your router, do not worry! Compex has
designed another utility program NpFind that helps you verify the IP address of
your Compex product. You can also find this utility in the Product CD.
From the Product CD, click on Software and select NpFind program to run it.
Once your Compex WPE54G has connected to your PC, the program will
automatically detect the device and display its IP address.
Open your Internet browser, enter
Hhttp://192.168.168.1H in the address
bar and hit the Enter key from the
keyboard.
You will then reach the home page of Compex WPE54G’s web-based
interface.
Note:
Refer to User’s Manual for instructions on how to configure Compex WPE54G
for wireless access.