Hardware Guide
hardware guide - wpj419
Last Updated: 13/05/2022
Copyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Systems.
While every eort is made to ensure the information is accurate,
Compex does not accept liability for any errors or mistakes that may arise. All specications are subject to change without notice.
Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6288 8220 | sales@compex.com.sg | Last Updated: 13/05/2022 SL, LL
Power Requirements
Power Over Ethernet 1x 802.3af/at PoE, IEEE 802.3af/at (48-56v) for
Daughter Board
DC Jack Connector 12V for main board
Power Consumption 12W (Max)
SIM Slot Pin Assignment
SIM Slot Pin SIM Signal
1 VCC VCC
2 RST SIM_RST
3 CLK SIM_CLK
4 CD SIM_CARD_IN
5 GND GND
6 VPP VPP
7 I/O SIM_DATA
LED Indicators
SD Card Socket Pin Assignment
SD card socket
1 SD_DAT2
2 SD_CD/DAT3
3 SD_CMD
4 SD_VDD
5 SD_CLK
6 SD_VSS/GND
7 SD_DAT0
8 SD_DAT1
9 SD_CD
10/11 Cover_GND/SD_GND
JTAG Interface
JTAG Interface
Pin Signal Pin Signal
1 3.3V 2 3.3V
3 JTAG_TRST_N 4 NC
5 JTAG_TDI 6 GND
7 JTAG_TMS 8 GND
9 JTAG_TCK 10 GND
11 NC 12 NC
13 JTAG_TDO 14 GND
15 JTAG_RST_N 16 NC
17 GND 18 GND
19 GND 20 GND
Serial 4-Pin Connector Pin Assignment
Pin Signal
1 VCC – 3.3V
2 UART Transmit Data
3 UART Receive Data
4 GND
Serial 6-Pin Connector Pin Assignment
Pin Signal
1 VCC – 3.3V
2 UART1_RTS
3 UART1_TXD
4 UART1_RXD
5 UART1_CTS
6 GND
USB 2.0 Port Pin Assignment
Pin Signal
1 VDD
2 USB2_D_M
3 USB2_D_P
4 GND
5 GND
6 GND
LED Indicators
DS5 POWER
DS11 Ethernet1
DS10 Ethernet0