Installation guide

Compro TN2200 - Quick Installation Guide

Installation

1. Ethernet cable from wireless router/hub to PoE switch/router: Connect the PoE

switch/router with the wireless router/hub that has been connected to your

Cable/ADSL modem for internet connecting.

2. Ethernet port of the camera: Use the RJ-45 Ethernet cable (not supplied in the

package) to connect the Ethernet port of the network camera to the PoE port of

your PoE switch/router.

3. Make sure your smartphone is able to go to internet via your wireless router.

Using a Non-PoE Switch

If you are using the camera with a non PoE capable network switch/router, please pre-

pare a PoE injector (midspan, optional) rst in order to power the camera. Then connect

your camera in the following way:

Midspan

(PoE Injector)

PoE Switch

(802.3af class3)

Wireless

Router/Hub

Wireless

Router/Hub

Internet

1. Ethernet port on PoE injector: Use a RJ-45 Ethernet cable (not supplied in the

package) to connect the RJ-45 connector on PoE injector marked “IN”. Then con-

nect the wireless router/hub.

2. Ethernet port on camera: Attach a RJ-45 Ethernet cable (not supplied in the pack-

age) from the “OUT” RJ-45 connector on PoE injector to the Ethernet port of the

network camera.

3. Make sure your smartphone is able to go to internet via your wireless router.