Installation guide
Compro TN2200 - Quick Installation Guide
13
Installation
Adjust the Lens
To adjust the direction of the lens, you need to remove the camera’s top cover rst. You
can connect the camera’s composite video jack to the video input jack of your TV to aid
you in lens adjustment.
Reset Button
Composite Video Output
microSD card slot
Adjust Pan/Tilt
To adjust the camera's panning or tilting position:
1. Loosen the pan adjustment screw and then gently twist the lens holder left or
right to adjust the camera's panning position. The camera allows for 40 degrees
of pan adjustment, as shown in below gure.
40°
90°
2. Tighten the pan adjustment screw and then, if necessary, go on to adjust the tilt-
ing position.
3. Loosen the tilt adjustment screw on both sides of the lens holder, as shown in be-
low gure, and then gently tilt the lens holder up or down to adjust the camera's
tilting position. The camera allows for 90 degrees of tilt adjustment.