Installation guide
Compro TN2200 - Quick Installation Guide
14
Installation
40°
90°
4. Having obtained the optimal result, tighten the tilt adjustment screws and re-
attach the top cover to complete the operation.
Change SD Memory Card
The camera comes with a 4GB microSD card pre-installed inside the housing. The SD
memory card is user-upgradeable. The following explains how to change the SD memo-
ry card.
1. Power o the camera. Then loosen the xing screws on the top cover with the
supplied hex key and remove the top cover.
2. Locate the microSD card slot. Then push the pre-installed SD card gently to re-
lease it.
Reset Button
Composite Video Output
microSD card slot
3. Pull the SD card out and insert a new one into the slot. Finally, re-install the top
cover to complete the upgrade.