Installation guide

Compro TN2200 - Quick Installation Guide
6
Installation
Installation
Wall / Ceiling Mount
The camera can be mounted on a wall or ceiling with or without the supplied wall
mount base installed. The wall mount base is generally used for wall mount applications
when the camera's cable is not run through the mounting surface.
Reset Button
Composite Video Output
microSD card slot
Wall Mount Base
If you want to feed the camera's cable through a dropped ceiling, you can drill a cable
hole on the mounting surface and then mount the camera without using the wall
mount base. The following sections explain 2 dierent mounting options.
Using Wall Mount Base
1. Use the supplied hex key to unscrew the top cover from the camera.
Rubber O-ring
2. Stick the supplied drill template A to the wall (or place the wall mount base
against the wall to mark the screw hole locations). Then drill 4 mounting holes on
the wall.