Installation guide

Compro TN2200 - Quick Installation Guide
7
Installation
Rubber O-ring
3. Then, if you're mounting on a concrete wall, insert a screw anchor into each of
the mounting holes. After that, secure the wall mount base to the wall with the
supplied self-tapping screws.
Rubber O-ring
4. Fasten the camera to the wall mount base on the wall. Make sure you use a sup-
plied rubber O-ring in between the screws and the screw holes (as circled) to
avoid moisture entering the casing. Finally, re-attach the camera’s top cover and
secure the screws tightly with the supplied hex key.