User guide

NT® INTEGRATED FLOW CONTROLLER WITH DEVICENET™ COMMUNICATION USER GUIDE
26 Customer Service Tel. [phone] Customer Service Fax [phone] ENTEGRIS, INC.
Vendor Specific Section
This section specifies the Vendor
Specific attributes, service and be-
haviors supported by this device.
It is provided primarily to specify
which attributes and services are
supported and with what ranges.
NOTE: Specific definitions of attrib-
utes and services are included here
for reference only. For specification
details and latest revisions, see the
DeviceNet™ Specifications.
NOTE: Attribute Tables that include
an "NV" column use the following
nomenclature:
V = Volatile: value is lost upon
power cycle
NV = Nonvolatile: value is retained
through power cycle. A “Reset
Type 1” reinitializes these
values to their defaults (i.e.,
Out-of-Box configuration).
NVF = Nonvolatile Factory Set: value
is retained through power
cycle. Only the factory can
change these values with
special software access. A
“Reset Type 1” has no affect
on these values.
NVC = Nonvolatile Constant: value
is fixed, determined by soft-
ware. These values are “hard-
coded” and not settable.
Identity Object (01
hex
)
Class
ATTRIBUTES 1.0 - CLASS ATTRIBUTES - IDENTITY OBJECT
ACCESS DATA ATTRIBUTE
ATT. ID REQUIRED SUPPORTED RULE NAME TYPE DESCRIPTION VALUES
1 Optional Yes Get Revision UINT Object Revision = 01
SERVICES 1.0 - CLASS SERVICES - IDENTITY OBJECT
PARAMETER
CODE REQUIRED SUPPORTED NAME PARAMETERS DESCRIPTION VALUES
0E
hex
Required Yes Get_Attribute_ Attribute ID Retrieves an 1–255
Single (USINT) attribute value
ENT48906 10/15/04 8:12 AM Page 26