Service manual

RELOADING SEQUENCE: (See Figure 15)
RS 1. The gate link rests at a locked position, in a cutout on the mech. plate. This locked
position prevents the gate from opening out of sequence.
RS 2. The gate link is guided by a slot in the mech. plate and actuates by a ridge on the
bucket. As the bucket turns, the link is moved out of the locked position.
RS 3. As the link rises, the gate is opened. The spring maintains Pressure on the Link and the
gate.
RS 4. Product falls onto outside of the bucket.
RS 5. The bucket releases the gate link causing the gate to rest against the product.
RS 6. As the product falls into the bucket, the link returns to the locked position and the gate is
closed.
RS 7. The product remaining in the column is caught by the closed gate, keeping it above the
bucket.
RS 8. Bucket stops, product is Ready to vend.
FIGURE 15
S-11