Service manual

SECTION III: MECHANICAL HAZARDS
A. Servicing of Moving Parts and Assemblies
When servicing assemblies involving moving parts, use extreme caution!! Keep
fingers, hands, loose clothing, hair, tools, or any foreign material clear of
entrapment.
As noted before under the Electrical Hazards section, “Power On” servicing should
only be performed by qualified personnel. Refer to and heed the warnings noted in
Electrical Hazards section. These warnings refer to the potential hazards
associated with electrical power and moving parts. Always maintain maximum
clearances from electrical and moving parts.
Always install protective covers and guards when reassembling equipment.
B. Product Conversions
See the Service Section of the appropriate Service Manual for stack (or module)
conversion procedures. Improper installation of product shims or spacers can
result in product jams.
WARNING:
ALWAYS UNPLUG OUTLET CORD BEFORE ATTEMPTING TO CLEAR
PRODUCT JAMS, TO PREVENT ENTRAPMENT OF HANDS IN
MECHANISM.
WARNING
:
THIS VENDING MACHINE INCLUDES MECHANICAL EQUIPMENT WHICH
CAN BE HAZARDOUS IF IMPROPERLY HANDLED OR SERVICED.
USE CAUTION AND CONSULT THE VENDO SAFETY MANUAL AND THE
VENDO SERVICE MANUAL FOR ADDITIONAL SAFETY INFORMATION
Page 8