Service manual

FIGURE 3 FIGURE 4
LABEL INSTALLATION
COIN INSTRUCTION LABEL & PRICE LABEL APPLICATION:
Apply labels to a clean and dry surface. Peel backing from label and apply to plate with a firm
even pressure.
INSTRUCTION LABEL
(Refer to figure 3 for the following information.)
Plate “A” has Validator Opening separate and above the Coin Plate “B” shows the Validator
Opening built in the Coin Plate. Apply Instruction Label to area shown (as needed by the
vendor).
FLAVOR LABELS INSTALLATION:
In figures 4 & 5, corresponding styles are indicated by A, B, C, D, or E notations.
Insert Flavor Labels to the side or top of Selection Window or Button depending on the style.
See Figure 4 for selection style. Rear view of windows and buttons is shown in Figure 5.
Arrows point the direction to insert labels.
Selection Window and Selection Button Labels identify product contained in stack columns.
FIGURE 5
S-4