Service manual

ALTERNATE TEST VEND
DISPLAY HOW TO DISPLAY ACTION
“.00” OR
“(VEND PRICE)”
(With inner and outer doors
separated)
Control board automatically reverts to this
display from “Sales Information” Or “Control
Operation & Programming” after 15 seconds
of inactivity.
All vend and cash activities effect special test
meters (counters) only and will not change normal
(Door Closed) vend or cash meters.
CONTROL OPERATION & PROGRAMMING SUMMARY
MODE OPERATION RESULT/RESPONSE
CHANGE PAY OUT Press Selection Switch 1 .05  Pay Out
“CPO”
Press Selection Switch 2 .10 Pay Out
(Press Mode Switch Press Selection Switch 3 .25 Pay Out
One Time) Press Selection Switch 4 $1.00 Coin Pay Out (If Coin Changer is Available)
COLUMN TEST VEND Press Selection Switch 1 Increases Displayed Column Number
“TEST”
Press Selection Switch 2 Decreases Displayed Column Number
(Press Mode Switch Two Times) Press Selection Switch 3 Vends Displayed Column Number
PRICE SETTING Press Any Selection Switch Selection’s Current Price Is Displayed
“COST”
Press And Hold Same Selection Selection’s Price Increases
(Press Mode Switch Three Times) Press And Hold Same Selection Selection’s Price Decreases